This patch series continues the usb chipidea rewrite for Qualcommm platforms. I've dropped the patches that were applied to Peter's tree for chipidea. Now the phy drivers are left, along with a new hook to set the vbus in the phy and changes to chipidea to call the new hook. I've left the HSIC phy driver here, because it wasn't merged in the last round. Nothing has changed in that driver, so I believe it is ready to be merged now. The real changes are the new set_vbus() hook and how we're supposed to handle that in the HS phy driver. The only dependencies between subsystems is the set_vbus callback. If that can go into some stable branch in the phy tree, then Kishon can apply the phy patches on top of that and Peter can apply the small chipidea patch on top of that. Or everything can go in parallel, except for the chipidea patch that adds the set_vbus hook. That hook can be added after rc1 when dependencies merge. Patches based on v4.10-rc1 + first 22 patches from v5. Full branch is here[1]. Changes from v6: * Dropped first 22 applied patches * Rewrote phy_set_mode() patch to be msm specific * New set_vbus() callback in phy framework * Updated HS phy driver for set_vbus() callback Changes from v5: * Replaced "Emulate OTGSC interrupt enable path" patch with a patch from Peter * Updated HS phy driver to support set_mode callback to handle pullup * New patch to set the mode to device or host in chipidea udc pullup function to toggle the pullup for HS mode * New patch to drop lock around event_notify callback to avoid lockdep issues * Removal of extcon usage from HS phy driver * Picked up acks from Heikki and Peter on ULPI core patch Changes from v4: * Picked up Acks from Rob * Updated HS phy init sequence DT property to restrict it to offsets Changes from v3: * Picked up Acks from Peter * Updated extcon consolidation patch per Peter's comments * Folded in simplification from Heikki for ULPI DT matching Changes from v2: * Added SoC specific compatibles in phy bindings * Dropped AVVIS patch for OTG statemachine * New patch to consolidate extcon handlers * Picked up Acks from Peter * Rebased onto v4.8-rc1 * Reworked ULPI OF code to look at vid == 0 instead of pid == 0 * Dropped ULPI bindings for vid and pid overrides Changes from v1: * Reworked ULPI device probing to keep using vendor/product ids that come from DT if needed and falls back to OF style match when product id is 0 * PHY init later patch was rejected so that moved to a quirk flag and the msm wrapper started managing the phy on/off * Updated clk requirements for HSIC phy in binding doc * Added optional clk in wrapper for "housekeeping" found on older qcom platforms * Bug fix to OTGSC polling function * Changed runtime PM patch to set as active instead of get/put TODO: * DMA fails on arm64 so we need something like [2] to make it work. * The db410c needs a driver to toggle the onboard switch to connect the usb hub instead of micro port when the usb cable is disconnected. I've sent a patch set for this[3], which needs some further discussion/development. The current plan is to reintroduce the usb mux framework. * apq8064 platforms need a vbus regulator to really use otg and I haven't tried out the RPM based regulators yet * The HSIC phy on the apq8074 dragonboard is connected to a usb4604 device which requires the i2c driver to probe and send an i2c sequence before the HSIC controller enumerates or HSIC doesn't work. Right now I have a hack to force the controller to probe defer once so that usb4604 probes first. This needs a more proper solution like having the DT describe a linkage between the controller and the usb device so we can enforce probe ordering. My current plan is to use DT graphs/endpoints for this. [1] https://git.linaro.org/people/stephen.boyd/linux.git/log/?h=usb-hsic-8074 [2] https://patchwork.kernel.org/patch/9319527/ [3] https://lkml.kernel.org/r/20160914014246.31847-1-stephen.boyd@xxxxxxxxxx Stephen Boyd (5): phy: Add support for Qualcomm's USB HSIC phy usb: chipidea: msm: Configure phy for appropriate mode phy: Add set_vbus callback usb: chipidea: Signal vbus state to phy phy: Add support for Qualcomm's USB HS phy .../devicetree/bindings/phy/qcom,usb-hs-phy.txt | 78 +++++++ .../devicetree/bindings/phy/qcom,usb-hsic-phy.txt | 65 ++++++ drivers/phy/Kconfig | 15 ++ drivers/phy/Makefile | 2 + drivers/phy/phy-core.c | 15 ++ drivers/phy/phy-qcom-usb-hs.c | 256 +++++++++++++++++++++ drivers/phy/phy-qcom-usb-hsic.c | 160 +++++++++++++ drivers/usb/chipidea/ci.h | 7 +- drivers/usb/chipidea/ci_hdrc_msm.c | 4 + drivers/usb/chipidea/otg.c | 7 +- include/linux/phy/phy.h | 10 + 11 files changed, 615 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt create mode 100644 drivers/phy/phy-qcom-usb-hs.c create mode 100644 drivers/phy/phy-qcom-usb-hsic.c -- 2.10.0.297.gf6727b0 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
