On Wed, Dec 28, 2016 at 05:21:34PM +0100, Bastian Köcher wrote: > Signed-off-by: Bastian Köcher <git@xxxxxxx> > --- > Sorry for the delay, my vactions this year ended up being a little longer than expected given the chaos in Fort Lauderdale airport. See comments / suggestions below. > Patch for enabling Nexus 6P(msm8994) SDHCI support. > > The patch is based on the work of Jeremy McNicoll for > the Nexus 5x: > https://www.spinics.net/lists/linux-arm-msm/msg24827.html > > .../arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 262 +++++++++++++++++++++ > arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 82 +++++++ > arch/arm64/boot/dts/qcom/msm8994.dtsi | 154 ++++++++++-- > 3 files changed, 483 insertions(+), 15 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts > index dfa08f513dc4..d0bf9072b614 100644 > --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts > +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts > @@ -38,3 +38,265 @@ > }; > }; > }; > + > +&smd_rpm { This node seems to be identical to what I have, so it makes more sense for us to share this type of thing. Can you take a look at the V2 I just sent and CC'd you on. By removing smd_rpm and including arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi you get all my fixes for FREE! > + rpm { > + rpm_requests { > + pm8994-regulators { > + > + vdd_l1-supply = <&pm8994_s1>; > + vdd_l2_26_28-supply = <&pm8994_s3>; > + vdd_l3_11-supply = <&pm8994_s3>; > + vdd_l4_27_31-supply = <&pm8994_s3>; > + vdd_l5_7-supply = <&pm8994_s3>; > + vdd_l6_12_32-supply = <&pm8994_s5>; > + vdd_l8_16_30-supply = <&vreg_vph_pwr>; > + vdd_l9_10_18_22-supply = <&vreg_vph_pwr>; > + vdd_l13_19_23_24-supply = <&vreg_vph_pwr>; > + vdd_l14_15-supply = <&pm8994_s5>; > + vdd_l17_29-supply = <&vreg_vph_pwr>; > + vdd_l20_21-supply = <&vreg_vph_pwr>; > + vdd_l25-supply = <&pm8994_s5>; > + /*vin_lvs1_2 = <&pm8994_s4>; */ > + > + s1 { > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <800000>; > + }; > + > + s2 { > + }; > + > + s3 { > + regulator-min-microvolt = <1300000>; > + regulator-max-microvolt = <1300000>; > + }; > + > + s4 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-allow-set-load; > + regulator-system-load = <325000>; > + }; > + > + s5 { > + regulator-min-microvolt = <2150000>; > + regulator-max-microvolt = <2150000>; > + }; > + > + s7 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + l1 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + }; > + > + l2 { > + regulator-min-microvolt = <1250000>; > + regulator-max-microvolt = <1250000>; > + }; > + > + l3 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + }; > + > + l4 { > + regulator-min-microvolt = <1225000>; > + regulator-max-microvolt = <1225000>; > + }; > + > + l5 { > + }; > + > + l6 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + l7 { > + }; > + > + l8 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + l9 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + l10 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + }; > + > + l11 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + qcom,init-voltage = <1200000>; > + }; > + > + l12 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + proxy-supply = <&pm8994_l12>; > + qcom,proxy-consumer-enable; > + qcom,proxy-consumer-current = <10000>; > + status = "okay"; > + }; > + > + l13 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2950000>; > + qcom,init-voltage = <2950000>; > + status = "okay"; > + }; > + > + l14 { > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + qcom,init-voltage = <1200000>; > + proxy-supply = <&pm8994_l14>; > + qcom,proxy-consumer-enable; > + qcom,proxy-consumer-current = <10000>; > + status = "okay"; > + }; > + > + l15 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + status = "okay"; > + }; > + > + l16 { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <2700000>; > + qcom,init-voltage = <2700000>; > + status = "okay"; > + }; > + > + l17 { > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <2700000>; > + qcom,init-voltage = <2700000>; > + status = "okay"; > + }; > + > + l18 { > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-always-on; > + qcom,init-voltage = <3000000>; > + qcom,init-ldo-mode = <1>; > + }; > + > + l19 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + status = "okay"; > + }; > + > + l20 { > + regulator-min-microvolt = <2950000>; > + regulator-max-microvolt = <2950000>; > + regulator-always-on; > + regulator-boot-on; > + regulator-allow-set-load; > + regulator-system-load = <570000>; > + }; > + > + l21 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-always-on; > + qcom,init-voltage = <1800000>; > + }; > + > + l22 { > + regulator-min-microvolt = <3100000>; > + regulator-max-microvolt = <3100000>; > + qcom,init-voltage = <3100000>; > + }; > + > + l23 { > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + qcom,init-voltage = <2800000>; > + }; > + > + l24 { > + regulator-min-microvolt = <3075000>; > + regulator-max-microvolt = <3150000>; > + qcom,init-voltage = <3075000>; > + }; > + > + l25 { > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + }; > + > + l26 { > + /* TODO: value from downstream > + regulator-min-microvolt = <987500>; > + fails to apply */ > + }; > + > + l27 { > + regulator-min-microvolt = <1050000>; > + regulator-max-microvolt = <1050000>; > + qcom,init-voltage = <1050000>; > + }; > + > + l28 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + qcom,init-voltage = <1000000>; > + proxy-supply = <&pm8994_l28>; > + qcom,proxy-consumer-enable; > + qcom,proxy-consumer-current = <10000>; > + }; > + > + l29 { > + /* TODO: Unsupported voltage range.. > + regulator-min-microvolt = <2800000>; > + regulator-max-microvolt = <2800000>; > + qcom,init-voltage = <2800000>; > + */ > + }; > + > + l30 { > + /* TODO: get this verified > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + */ > + }; > + > + l31 { > + regulator-min-microvolt = <1262500>; > + regulator-max-microvolt = <1262500>; > + qcom,init-voltage = <1262500>; > + }; > + > + l32 { > + /* TODO: get this verified > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + qcom,init-voltage = <1800000>; > + */ > + }; > + > + }; > + }; > + }; > +}; > diff --git a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi > index 0e4eea0df25d..66c46b8f9e83 100644 > --- a/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8994-pins.dtsi > @@ -35,4 +35,86 @@ > bias-pull-down; > }; > }; > + > + /* 0-3 for sdc1 4-6 for sdc2 */ > + /* Order of pins */ > + /* SDC1: CLK -> 0, CMD -> 1, DATA -> 2, RCLK -> 3 */ > + /* SDC2: CLK -> 4, CMD -> 5, DATA -> 6 */ > + pmx_sdc1_clk { Change all your node names, anything before the '{' to make sure it doesn't have '_' underscores. > + sdc1_clk_on: clk_on { change this to sdc1_clk_on: clk-on { label: node-name { > + pinmux { > + pins = "sdc1_clk"; > + }; > + pinconf { > + pins = "sdc1_clk"; > + bias-disable = <0>; /* No pull */ > + drive-strength = <16>; /* 16mA */ > + }; > + }; > + sdc1_clk_off: clk_off { > + pinmux { > + pins = "sdc1_clk"; > + }; > + pinconf { > + pins = "sdc1_clk"; > + bias-disable = <0>; /* No pull */ > + drive-strength = <2>; /* 2mA */ > + }; > + }; > + }; > + > + pmx_sdc1_cmd { > + sdc1_cmd_on: cmd_on { > + pinmux { > + pins = "sdc1_cmd"; > + }; > + pinconf { > + pins = "sdc1_cmd"; > + bias-pull-up; > + drive-strength = <8>; > + }; > + }; > + sdc1_cmd_off: cmd_off { > + pinmux { > + pins = "sdc1_cmd"; > + }; > + pinconf { > + pins = "sdc1_cmd"; > + bias-pull-up = <0x3>; /* same as 3.10 ?? */ > + drive-strength = <2>; /* 2mA */ > + }; > + }; > + }; > + > + pmx_sdc1_data { > + sdc1_data_on: data_on { > + pinmux { > + pins = "sdc1_data"; > + }; > + pinconf { > + pins = "sdc1_data"; > + bias-pull-up; > + drive-strength = <8>; /* 8mA */ > + }; > + }; > + sdc1_data_off: data_off { > + pinmux { > + pins = "sdc1_data"; > + }; > + pinconf { > + pins = "sdc1_data"; > + bias-pull-up; > + drive-strength = <2>; > + }; > + }; > + }; > + > + pmx_sdc1_rclk { > + sdc1_rclk_on: rclk_on { > + bias-pull-down; /* pull down */ > + }; > + sdc1_rclk_off: rclk_off { > + bias-pull-down; /* pull down */ > + }; > + }; > }; > diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi > index f33c41d01c86..703888d608c6 100644 > --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi > +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi > @@ -73,6 +73,11 @@ > <0xf9002000 0x1000>; > }; > > + apcs: syscon@f900d000 { > + compatible = "syscon"; > + reg = <0xf900d000 0x2000>; > + }; > + > timer@f9020000 { > #address-cells = <1>; > #size-cells = <1>; > @@ -156,11 +161,6 @@ > <&clock_gcc GCC_BLSP1_AHB_CLK>; > }; > > - tcsr_mutex_regs: syscon@fd484000 { > - compatible = "syscon"; > - reg = <0xfd484000 0x2000>; > - }; > - > clock_gcc: clock-controller@fc400000 { > compatible = "qcom,gcc-msm8994"; > #clock-cells = <1>; > @@ -168,6 +168,75 @@ > #power-domain-cells = <1>; > reg = <0xfc400000 0x2000>; > }; > + > + sdhci1: mmc@f9824900 { > + compatible = "qcom,sdhci-msm-v4"; > + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; > + reg-names = "hc_mem", "core_mem"; > + > + interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>, > + <GIC_SPI 138 IRQ_TYPE_NONE>; > + interrupt-names = "hc_irq", "pwr_irq"; > + > + clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>, > + <&clock_gcc GCC_SDCC1_AHB_CLK>; > + clock-names = "core", "iface"; > + > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on > + &sdc1_rclk_on>; > + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off > + &sdc1_rclk_off>; > + > + vdd-supply = <&pm8994_l20>; > + qcom,vdd-voltage-level = <2950000 2950000>; > + qcom,vdd-current-level = <200 570000>; > + > + vdd-io-supply = <&pm8994_s4>; > + qcom,vdd-io-voltage-level = <1800000 1800000>; > + qcom,vdd-io-current-level = <200 325000>; > + > + regulator-always-on; > + bus-width = <8>; > + mmc-hs400-1_8v; > + status = "okay"; > + }; > + > + vreg_vph_pwr: vreg-vph-pwr { > + compatible = "regulator-fixed"; > + status = "okay"; > + regulator-name = "vph-pwr"; > + > + regulator-min-microvolt = <3600000>; > + regulator-max-microvolt = <3600000>; > + > + regulator-always-on; > + }; > + > + rpm_msg_ram: memory@fc428000 { > + compatible = "qcom,rpm-msg-ram"; > + reg = <0xfc428000 0x4000>; > + }; > + > + sfpb_mutex_regs: syscon@fd484000 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "syscon"; > + reg = <0xfd484000 0x400>; > + }; > + > + sfpb_mutex: hwmutex { > + compatible = "qcom,sfpb-mutex"; > + syscon = <&sfpb_mutex_regs 0x0 0x100>; > + #hwlock-cells = <1>; > + }; > + > + smem { > + compatible = "qcom,smem"; > + memory-region = <&smem_region>; > + qcom,rpm-msg-ram = <&rpm_msg_ram>; > + hwlocks = <&sfpb_mutex 3>; > + }; > }; > > memory { > @@ -193,22 +262,77 @@ > #size-cells = <2>; > ranges; > > - smem_mem: smem_region@6a00000 { > + smem_region: smem@6a00000 { good. > reg = <0x0 0x6a00000 0x0 0x200000>; > no-map; > }; > }; > > - tcsr_mutex: hwlock { > - compatible = "qcom,tcsr-mutex"; > - syscon = <&tcsr_mutex_regs 0 0x80>; > - #hwlock-cells = <1>; > - }; > + smd_rpm: smd { > + compatible = "qcom,smd"; > + > + rpm { > + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; > + qcom,ipc = <&apcs 8 0>; > + qcom,smd-edge = <15>; > + qcom,local-pid = <0>; > + qcom,remote-pid = <6>; > + > + rpm_requests { s/rpm_requests {/rpm-requests {/ Node names cannot have an underscore. -jeremy > + compatible = "qcom,rpm-msm8994"; > + qcom,smd-channels = "rpm_requests"; > + > + rpmcc: qcom,rpmcc { > + /* TODO: update when rpmcc-msm8994 support added */ > + compatible = "qcom,rpmcc-msm8916", > + "qcom,rpmcc"; > + #clock-cells = <1>; > + }; > > - qcom,smem@6a00000 { > - compatible = "qcom,smem"; > - memory-region = <&smem_mem>; > - hwlocks = <&tcsr_mutex 3>; > + smd_rpm_regulators: pm8994-regulators { > + compatible = "qcom,rpm-pm8994-regulators"; > + > + pm8994_s1: s1 {}; > + pm8994_s2: s2 {}; > + pm8994_s3: s3 {}; > + pm8994_s4: s4 {}; > + pm8994_s5: s5 {}; > + pm8994_s6: s6 {}; > + pm8994_s7: s7 {}; > + > + pm8994_l1: l1 {}; > + pm8994_l2: l2 {}; > + pm8994_l3: l3 {}; > + pm8994_l4: l4 {}; > + pm8994_l6: l6 {}; > + pm8994_l8: l8 {}; > + pm8994_l9: l9 {}; > + pm8994_l10: l10 {}; > + pm8994_l11: l11 {}; > + pm8994_l12: l12 {}; > + pm8994_l13: l13 {}; > + pm8994_l14: l14 {}; > + pm8994_l15: l15 {}; > + pm8994_l16: l16 {}; > + pm8994_l17: l17 {}; > + pm8994_l18: l18 {}; > + pm8994_l19: l19 {}; > + pm8994_l20: l20 {}; > + pm8994_l21: l21 {}; > + pm8994_l22: l22 {}; > + pm8994_l23: l23 {}; > + pm8994_l24: l24 {}; > + pm8994_l25: l25 {}; > + pm8994_l26: l26 {}; > + pm8994_l27: l27 {}; > + pm8994_l28: l28 {}; > + pm8994_l29: l29 {}; > + pm8994_l30: l30 {}; > + pm8994_l31: l31 {}; > + pm8994_l32: l32 {}; > + }; > + }; > + }; > }; > }; > > -- > 2.11.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
