SLPI is low pass sensor controller subsystem. This patch has: 1- slpi rproc driver source file. 2- DT-Binding documentation 3- slpi smp2p DT node This patch is tested on MSM8996 MTP platform with modification in regulator code. Avaneesh Kumar Dwivedi (3): remoteproc: qcom: Introduce Qualcomm low pass sensor peripheral loader. dt-binding: remoteproc: Introduce DT binding for Qualcomm slpi subsystem. arm64: dts: msm8996: Add SMP2P node for Qualcomm SLPI rproc driver. .../devicetree/bindings/remoteproc/qcom,slpi.txt | 88 ++++ arch/arm64/boot/dts/qcom/msm8996.dtsi | 24 ++ drivers/remoteproc/Kconfig | 12 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/qcom_slpi_pil.c | 445 +++++++++++++++++++++ 5 files changed, 570 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,slpi.txt create mode 100644 drivers/remoteproc/qcom_slpi_pil.c -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project. -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html