Add Documentation for pci-endpoint-test driver. Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> --- Documentation/misc-devices/pci-endpoint-test.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/misc-devices/pci-endpoint-test.txt diff --git a/Documentation/misc-devices/pci-endpoint-test.txt b/Documentation/misc-devices/pci-endpoint-test.txt new file mode 100644 index 0000000..4385718 --- /dev/null +++ b/Documentation/misc-devices/pci-endpoint-test.txt @@ -0,0 +1,35 @@ +Driver for PCI Endpoint Test Function + +This driver should be used as a host side driver if the root complex is +connected to a configurable pci endpoint running *pci_epf_test* function +driver configured according to [1]. + +The "pci_endpoint_test" driver can be used to perform the following tests. + +The PCI driver for the test device performs the following tests + *) verifying addresses programmed in BAR + *) raise legacy IRQ + *) raise MSI IRQ + *) read data + *) write data + *) copy data + +This misc driver creates /dev/pci-endpoint-test.<num> for every +*pci_epf_test* function connected to the root complex and "ioctls" +should be used to perform the above tests. + +ioctl +----- + PCITEST_BAR: Tests the BAR. The number of the BAR that has to be tested + should be passed as argument. + PCITEST_LEGACY_IRQ: Tests legacy IRQ + PCITEST_MSI: Tests message signalled interrupts. The MSI number that has + to be tested should be passed as argument. + PCITEST_WRITE: Perform write tests. The size of the buffer should be passed + as argument. + PCITEST_READ: Perform read tests. The size of the buffer should be passed + as argument. + PCITEST_COPY: Perform read tests. The size of the buffer should be passed + as argument. + +[1] -> Documentation/PCI/endpoint/function/binding/pci-test.txt -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html