This default-enables the devices found on the APQ8060 DragonBoard in the qcom_defconfig: - EBI2 bus - SMSC911x ethernet - LEDs class and PM8058 LEDs driver, trigger and heartbeat trigger (so we get heartbeat on the board by default) - IIO framework, including the HRTimer trigger, KXSD9 accelerometer, MPU3050 gyroscope, AK8975 magnetometer and BMP085 pressure sensor Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- arch/arm/configs/qcom_defconfig | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig index 8c3a0108a231..eed314e39721 100644 --- a/arch/arm/configs/qcom_defconfig +++ b/arch/arm/configs/qcom_defconfig @@ -55,6 +55,7 @@ CONFIG_CFG80211=y CONFIG_RFKILL=y CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +CONFIG_QCOM_EBI2=y CONFIG_MTD=y CONFIG_MTD_BLOCK=y CONFIG_MTD_M25P80=y @@ -71,6 +72,7 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_NETDEVICES=y CONFIG_DUMMY=y CONFIG_KS8851=y +CONFIG_SMSC911X=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y CONFIG_SLIP=y @@ -151,6 +153,12 @@ CONFIG_MMC_QCOM_DML=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_MSM=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PM8058=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PM8XXX=y CONFIG_DMADEVICES=y @@ -171,6 +179,14 @@ CONFIG_QCOM_PM=y CONFIG_QCOM_SMEM=y CONFIG_QCOM_SMD=y CONFIG_QCOM_SMD_RPM=y +CONFIG_IIO=y +CONFIG_IIO_BUFFER_CB=y +CONFIG_IIO_SW_TRIGGER=y +CONFIG_KXSD9=y +CONFIG_MPU3050_I2C=y +CONFIG_AK8975=y +CONFIG_IIO_HRTIMER_TRIGGER=y +CONFIG_BMP280=y CONFIG_PHY_QCOM_APQ8064_SATA=y CONFIG_PHY_QCOM_IPQ806X_SATA=y CONFIG_EXT2_FS=y -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
