On 01/04/2017 07:04 PM, Srinivas Kandagatla wrote:
This patch moves hdmi pinctrl defination from board file to soc level
pinctrl file. If not this pinctrl setup will be duplicated across all
the apq8064 based board files.
Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 22 ----------------------
arch/arm/boot/dts/qcom-apq8064-pins.dtsi | 19 +++++++++++++++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 2 ++
3 files changed, 21 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 3d37cab..881ce70 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -75,25 +75,6 @@
bias-disable;
};
};
-
- hdmi_pinctrl: hdmi-pinctrl {
- mux {
- pins = "gpio70", "gpio71", "gpio72";
- function = "hdmi";
- };
-
- pinconf_ddc {
- pins = "gpio70", "gpio71";
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pinconf_hpd {
- pins = "gpio72";
- bias-pull-down;
- drive-strength = <16>;
- };
- };
};
rpm@108000 {
@@ -368,9 +349,6 @@
hpd-gpios = <&tlmm_pinmux 72 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_pinctrl>;
-
ports {
port@0 {
endpoint {
diff --git a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
index 6b801e7..cba4450 100644
--- a/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064-pins.dtsi
@@ -284,4 +284,23 @@
bias-disable = <0>;
};
};
+
+ hdmi_pinctrl: hdmi-pinctrl {
+ mux {
+ pins = "gpio70", "gpio71", "gpio72";
+ function = "hdmi";
+ };
+
+ pinconf_ddc {
+ pins = "gpio70", "gpio71";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ pinconf_hpd {
+ pins = "gpio72";
+ bias-pull-down;
+ drive-strength = <16>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 407a461..e68a8a1 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1327,6 +1327,8 @@
hdmi: hdmi-tx@4a00000 {
compatible = "qcom,hdmi-tx-8960";
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pinctrl>;
reg = <0x04a00000 0x2f0>;
reg-names = "core_physical";
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
