Re: [PATCH v4 1/6] clk: qcom: ipq4019: remove fixed clocks and add pll clocks

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/25, Abhishek Sahu wrote:
> The current ipq4019 clock driver registered the PLL clocks and
> dividers as fixed clock. These fixed clock needs to be removed
> from driver probe function and same need to be registered with
> clock framework. These PLL clocks should be programmed only
> once and the same are being programmed already by the boot
> loader so the set rate operation is not required for these
> clocks. Only the rate can be calculated by clock operations
> in clock driver file so this patch adds the same.
> 
> The PLL takes the reference clock from XO and generates the
> intermediate VCO frequency. This VCO frequency will be divided
> down by different PLL internal dividers. Some of the PLL
> internal dividers are fixed while other are programmable.
> 
> Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
> ---

Applied to clk-ipq4019 and merged into clk-next.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux