On Mon, Dec 19, 2016 at 09:19:23PM +0530, Vinod Koul wrote:
> On Sun, Dec 18, 2016 at 11:06:42PM -0600, Andy Gross wrote:
> > On Sun, Dec 18, 2016 at 09:56:02PM +0530, Vinod Koul wrote:
> > > On Thu, Dec 15, 2016 at 03:25:52PM +0530, Abhishek Sahu wrote:
> > > > The current DMA APIs only support SGL or data in generic format.
> > > > The QCA BAM DMA engine data cannot be mapped with already
> > > > available APIs due to following reasons.
> > > >
> > > > 1. The QCA BAM DMA engine uses custom flags which cannot be
> > > > mapped with generic DMA engine flags.
> > > > 2. Some peripheral driver like QCA QPIC NAND/LCD requires to
> > > > set specific flags (Like NWD, EOT) for some of the descriptors
> > > > in scatter gather list. The already available mapping APIs take
> > > > flags parameter in API itself and there is no support for
> > > > passing DMA specific flags for each SGL entry.
> > > >
> > > > Now this patch adds the support for making the DMA descriptor from
> > > > custom data with new DMA mapping function prep_dma_custom_mapping.
> > > > The peripheral driver will pass the custom data in this function and
> > > > DMA engine driver will form the descriptor according to its own
> > > > logic. In future, this API can be used by any other DMA engine
> > > > drivers also which are unable to do DMA mapping with already
> > > > available API’s.
> > > >
> > > > Signed-off-by: Abhishek Sahu <absahu@xxxxxxxxxxxxxx>
> > > > ---
> > > > include/linux/dmaengine.h | 5 +++++
> > > > 1 file changed, 5 insertions(+)
> > > >
> > > > diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
> > > > index cc535a4..6324c1f 100644
> > > > --- a/include/linux/dmaengine.h
> > > > +++ b/include/linux/dmaengine.h
> > > > @@ -692,6 +692,8 @@ struct dma_filter {
> > > > * be called after period_len bytes have been transferred.
> > > > * @device_prep_interleaved_dma: Transfer expression in a generic way.
> > > > * @device_prep_dma_imm_data: DMA's 8 byte immediate data to the dst address
> > > > + * @device_prep_dma_custom_mapping: prepares a dma operation from dma driver
> > > > + * specific custom data
> > > > * @device_config: Pushes a new configuration to a channel, return 0 or an error
> > > > * code
> > > > * @device_pause: Pauses any transfer happening on a channel. Returns
> > > > @@ -783,6 +785,9 @@ struct dma_device {
> > > > struct dma_async_tx_descriptor *(*device_prep_dma_imm_data)(
> > > > struct dma_chan *chan, dma_addr_t dst, u64 data,
> > > > unsigned long flags);
> > > > + struct dma_async_tx_descriptor *(*device_prep_dma_custom_mapping)(
> > > > + struct dma_chan *chan, void *data,
> > > > + unsigned long flags);
> > >
> > > This needs a discussion. Why do you need to add a new API for framework.
> > >
> > > What are NWD and EOT flags, cna you details out the flags?
> >
> > These are the notify when done and end of transaction flags. I believe the last
> > time we talked about this, we (Vinod and I) agreed to just expose a QCOM only interface to set
> > the special transaction flags. You'd then have to have some other API to fixup
> > the descriptor with the right qcom flags.
>
> Okay, do you have pointer on that one, will avoid asking the same questions
> again.
I'll see if I can find the correspondance and send to you directly.
>
> > Ahbishek, correct me where i am wrong on the following:
> > So two main differences between a normal descriptor and a command descriptor:
> > 1) size of the descriptor
> > 2) the flag setting
> > 3) data sent in is a modified scatter gather that includes flags , vs a normal
> > scatter gather
> >
> > So the CMD descriptors in a given sgl can all have varying flags set? I'd assume
> > they all have CMD flag set. Do the current users of the command descriptors
> > coalesce all of their requests into a big list?
> >
> > So a couple of thoughts on how to deal with this:
> >
> > 1) Define a virtual channel for the command descriptors vs a normal DMA
> > transaction. This lets you use the same hardware channel, but lets you discern
> > which descriptor format you need to use. The only issue I see with this is the
> > required change in device tree binding to target the right type of channel (cmd
> > vs normal).
>
> Or mark the descriptor is cmd and write accordingly...
The only issue i see with that is knowing how much to pre-allocate during the
prep call. The flag set API would be called on the allocated tx descriptor. So
you'd have to know up front and be able to specify it.
>
> >
> > 2) Provide an API to set flags for the descriptor on a whole descriptor basis.
> >
> > 3) If you have a set of transactions described by an sgl that has disparate use
> > of flags, you split the list and use a separate transaction. In other words, we
> > need to enforce that the flag set API will be applied to all descriptors
> > described by an sgl. This means that the whole transaction may be comprised of
> > multiple async TX descriptors.
Regards,
Andy
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
