[PATCH 1/2] soc: ti: Use remoteproc auto_boot feature

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The function wkup_m3_rproc_boot_thread waits for asynchronous
firmware loading to complete successfully before calling
rproc_boot(). The same can be achieved by just setting
rproc->auto_boot flag. Change this. As a result this change
removes wkup_m3_rproc_boot_thread and moves m3_ipc->sync_complete
initialization to the wkup_m3_ipc_probe().

Other than the current usage, the firmware_loading_complete is
only used in rproc_del() where it's no longer needed.  This
change is in preparation for removing firmware_loading_complete
completely.

CC: Dave Gerlach <d-gerlach@xxxxxx>
CC: Suman Anna <s-anna@xxxxxx>
CC: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Sarangdhar Joshi <spjoshi@xxxxxxxxxxxxxx>
---

Hi Suman,

Unfortunately, I don't have a TI device and couldn't test this
change. Is it possible for you to test this change on TI device?

Thanks in advance.

Regards,
Sarang

 drivers/remoteproc/wkup_m3_rproc.c |  2 +-
 drivers/soc/ti/wkup_m3_ipc.c       | 35 ++---------------------------------
 2 files changed, 3 insertions(+), 34 deletions(-)

diff --git a/drivers/remoteproc/wkup_m3_rproc.c b/drivers/remoteproc/wkup_m3_rproc.c
index 18175d0..79ea022 100644
--- a/drivers/remoteproc/wkup_m3_rproc.c
+++ b/drivers/remoteproc/wkup_m3_rproc.c
@@ -167,7 +167,7 @@ static int wkup_m3_rproc_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	rproc->auto_boot = false;
+	rproc->auto_boot = true;
 
 	wkupm3 = rproc->priv;
 	wkupm3->rproc = rproc;
diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c
index 8823cc8..31090d70 100644
--- a/drivers/soc/ti/wkup_m3_ipc.c
+++ b/drivers/soc/ti/wkup_m3_ipc.c
@@ -17,7 +17,6 @@
 
 #include <linux/err.h>
 #include <linux/kernel.h>
-#include <linux/kthread.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
@@ -365,22 +364,6 @@ void wkup_m3_ipc_put(struct wkup_m3_ipc *m3_ipc)
 }
 EXPORT_SYMBOL_GPL(wkup_m3_ipc_put);
 
-static void wkup_m3_rproc_boot_thread(struct wkup_m3_ipc *m3_ipc)
-{
-	struct device *dev = m3_ipc->dev;
-	int ret;
-
-	wait_for_completion(&m3_ipc->rproc->firmware_loading_complete);
-
-	init_completion(&m3_ipc->sync_complete);
-
-	ret = rproc_boot(m3_ipc->rproc);
-	if (ret)
-		dev_err(dev, "rproc_boot failed\n");
-
-	do_exit(0);
-}
-
 static int wkup_m3_ipc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -388,7 +371,6 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
 	phandle rproc_phandle;
 	struct rproc *m3_rproc;
 	struct resource *res;
-	struct task_struct *task;
 	struct wkup_m3_ipc *m3_ipc;
 
 	m3_ipc = devm_kzalloc(dev, sizeof(*m3_ipc), GFP_KERNEL);
@@ -402,6 +384,8 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
 		return PTR_ERR(m3_ipc->ipc_mem_base);
 	}
 
+	init_completion(&m3_ipc->sync_complete);
+
 	irq = platform_get_irq(pdev, 0);
 	if (!irq) {
 		dev_err(&pdev->dev, "no irq resource\n");
@@ -449,25 +433,10 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
 
 	m3_ipc->ops = &ipc_ops;
 
-	/*
-	 * Wait for firmware loading completion in a thread so we
-	 * can boot the wkup_m3 as soon as it's ready without holding
-	 * up kernel boot
-	 */
-	task = kthread_run((void *)wkup_m3_rproc_boot_thread, m3_ipc,
-			   "wkup_m3_rproc_loader");
-
-	if (IS_ERR(task)) {
-		dev_err(dev, "can't create rproc_boot thread\n");
-		goto err_put_rproc;
-	}
-
 	m3_ipc_state = m3_ipc;
 
 	return 0;
 
-err_put_rproc:
-	rproc_put(m3_rproc);
 err_free_mbox:
 	mbox_free_channel(m3_ipc->mbox);
 	return ret;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux