Hi Archit, Thank you for the patch. On Tuesday 29 Nov 2016 11:37:41 Archit Taneja wrote: > Add the regulator supply properties needed by ADV7511 and ADV7533. > > The regulators are specified as optional properties since there can > be boards which have a fixed supply directly routed to the pins, and > these may not be modelled as regulator supplies. That's why we have support for dummy supplies in the kernel, isn't it ? Isn't it better to make the supplies mandatory in the bindings (and obviously handling them as optional in the driver for backward-compatibility) ? Apart from that, Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Acked-by: Rob Herring <robh@xxxxxxxxxx> > Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx> > --- > v3: > - Revert back to having a common avdd-supply property for the 1.8V > supplies > > Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt | 9 ++++++ > 1 file changed, 9 insertions(+) > > diff --git > a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt > b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index > 6532a59..13d53bc 100644 > --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt > +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt > @@ -56,6 +56,15 @@ Optional properties: > - adi,disable-timing-generator: Only for ADV7533. Disables the internal > timing generator. The chip will rely on the sync signals in the DSI data > lanes, rather than generate its own timings for HDMI output. > +- avdd-supply: A common 1.8V supply that powers up the AVDD, DVDD and PVDD > + pins. On ADV7511, it also feeds to the BGVDD pin. On ADV7533, it also > powers > + up the A2VDD pin. > +- v3p3-supply: A 3.3V supply that powers up the pin called DVDD_3V on > + ADV7511 and V3P3 on ADV7533. > + > +ADV7533 specific supplies: > +- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be > + either 1.2V or 1.8V. > > Required nodes: -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
