For v56 1.5.0 Mx current need to be limited during restart.
Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@xxxxxxxxxxxxxx>
---
drivers/remoteproc/qcom_q6v5_pil.c | 18 +++++++++++++++++-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 7ea2f53..3e3ed09 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -785,7 +785,7 @@ static int q6v5_start(struct rproc *rproc)
static int q6v5_stop(struct rproc *rproc)
{
struct q6v5 *qproc = (struct q6v5 *)rproc->priv;
- int ret;
+ int ret, val;
qproc->running = false;
@@ -803,6 +803,22 @@ static int q6v5_stop(struct rproc *rproc)
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_modem);
q6v5proc_halt_axi_port(qproc, qproc->halt_map, qproc->halt_nc);
+ if (qproc->hexagon_ver & 0x2) {
+ /*
+ * Assert QDSP6 I/O clamp, memory wordline clamp, and compiler
+ * memory clamp as a software workaround to avoid high MX
+ * current during LPASS/MSS restart.
+ */
+ ret = clk_prepare_enable(devm_clk_get(qproc->dev, "iface"));
+ if (!ret) {
+ val = readl_relaxed(
+ qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ val |= (Q6SS_CLAMP_IO | QDSP6v56_CLAMP_WL |
+ QDSP6v56_CLAMP_QMC_MEM);
+ writel_relaxed(val,
+ qproc->reg_base + QDSP6SS_PWR_CTL_REG);
+ }
+ }
reset_control_assert(qproc->mss_restart);
q6v5_clk_disable(qproc);
q6v5_regulator_disable(qproc);
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
