On 3 November 2016 at 22:54, Lina Iyer <lina.iyer@xxxxxxxxxx> wrote:
> Re-using idle state definition provided by arm,idle-state for domain
> idle states creates a lot of confusion and limits further evolution of
> the domain idle definition. To keep things clear and simple, define a
> idle states for domain using a new compatible "domain-idle-state".
>
> Fix existing PM domains code to look for the newly defined compatible.
>
> Cc: <devicetree@xxxxxxxxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Lina Iyer <lina.iyer@xxxxxxxxxx>
Reviewed-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Kind regards
Uffe
> ---
> .../bindings/power/domain-idle-state.txt | 33 ++++++++++++++++++++++
> .../devicetree/bindings/power/power_domain.txt | 8 +++---
> drivers/base/power/domain.c | 2 +-
> 3 files changed, 38 insertions(+), 5 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/power/domain-idle-state.txt
>
> diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.txt b/Documentation/devicetree/bindings/power/domain-idle-state.txt
> new file mode 100644
> index 0000000..eefc7ed
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/domain-idle-state.txt
> @@ -0,0 +1,33 @@
> +PM Domain Idle State Node:
> +
> +A domain idle state node represents the state parameters that will be used to
> +select the state when there are no active components in the domain.
> +
> +The state node has the following parameters -
> +
> +- compatible:
> + Usage: Required
> + Value type: <string>
> + Definition: Must be "domain-idle-state".
> +
> +- entry-latency-us
> + Usage: Required
> + Value type: <prop-encoded-array>
> + Definition: u32 value representing worst case latency in
> + microseconds required to enter the idle state.
> + The exit-latency-us duration may be guaranteed
> + only after entry-latency-us has passed.
> +
> +- exit-latency-us
> + Usage: Required
> + Value type: <prop-encoded-array>
> + Definition: u32 value representing worst case latency
> + in microseconds required to exit the idle state.
> +
> +- min-residency-us
> + Usage: Required
> + Value type: <prop-encoded-array>
> + Definition: u32 value representing minimum residency duration
> + in microseconds after which the idle state will yield
> + power benefits after overcoming the overhead in entering
> +i the idle state.
> diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
> index e165036..723e1ad 100644
> --- a/Documentation/devicetree/bindings/power/power_domain.txt
> +++ b/Documentation/devicetree/bindings/power/power_domain.txt
> @@ -31,7 +31,7 @@ Optional properties:
>
> - domain-idle-states : A phandle of an idle-state that shall be soaked into a
> generic domain power state. The idle state definitions are
> - compatible with arm,idle-state specified in [1].
> + compatible with domain-idle-state specified in [1].
> The domain-idle-state property reflects the idle state of this PM domain and
> not the idle states of the devices or sub-domains in the PM domain. Devices
> and sub-domains have their own idle-states independent of the parent
> @@ -85,7 +85,7 @@ Example 3:
> };
>
> DOMAIN_RET: state@0 {
> - compatible = "arm,idle-state";
> + compatible = "domain-idle-state";
> reg = <0x0>;
> entry-latency-us = <1000>;
> exit-latency-us = <2000>;
> @@ -93,7 +93,7 @@ Example 3:
> };
>
> DOMAIN_PWR_DN: state@1 {
> - compatible = "arm,idle-state";
> + compatible = "domain-idle-state";
> reg = <0x1>;
> entry-latency-us = <5000>;
> exit-latency-us = <8000>;
> @@ -118,4 +118,4 @@ The node above defines a typical PM domain consumer device, which is located
> inside a PM domain with index 0 of a power controller represented by a node
> with the label "power".
>
> -[1]. Documentation/devicetree/bindings/arm/idle-states.txt
> +[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt
> diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
> index 661737c..f0bc672 100644
> --- a/drivers/base/power/domain.c
> +++ b/drivers/base/power/domain.c
> @@ -2048,7 +2048,7 @@ int genpd_dev_pm_attach(struct device *dev)
> EXPORT_SYMBOL_GPL(genpd_dev_pm_attach);
>
> static const struct of_device_id idle_state_match[] = {
> - { .compatible = "arm,idle-state", },
> + { .compatible = "domain-idle-state", },
> { }
> };
>
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
