On 16/11/16 18:00, Ritesh Harjani wrote:
> sdhci-msm controller may have different clk-rates for each
> bus speed mode. Thus implement set_clock callback for
> sdhci-msm driver.
>
> Signed-off-by: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>
> Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxxx>
> Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Yes my Ack stands.
> ---
> drivers/mmc/host/sdhci-msm.c | 66 +++++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 65 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 45ead68..6d02fc2 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -84,6 +84,7 @@ struct sdhci_msm_host {
> struct clk *pclk; /* SDHC peripheral bus clock */
> struct clk *bus_clk; /* SDHC bus voter clock */
> struct clk *xo_clk; /* TCXO clk needed for FLL feature of cm_dll*/
> + unsigned long clk_rate;
> struct mmc_host *mmc;
> bool use_14lpp_dll_reset;
> };
> @@ -571,6 +572,69 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
> return SDHCI_MSM_MIN_CLOCK;
> }
>
> +/**
> + * __sdhci_msm_set_clock - sdhci_msm clock control.
> + *
> + * Description:
> + * MSM controller does not use internal divider and
> + * instead directly control the GCC clock as per
> + * HW recommendation.
> + **/
> +void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> + u16 clk;
> + /*
> + * Keep actual_clock as zero -
> + * - since there is no divider used so no need of having actual_clock.
> + * - MSM controller uses SDCLK for data timeout calculation. If
> + * actual_clock is zero, host->clock is taken for calculation.
> + */
> + host->mmc->actual_clock = 0;
> +
> + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
> +
> + if (clock == 0)
> + return;
> +
> + /*
> + * MSM controller do not use clock divider.
> + * Thus read SDHCI_CLOCK_CONTROL and only enable
> + * clock with no divider value programmed.
> + */
> + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> + sdhci_enable_clock(host, clk);
> +}
> +
> +/* sdhci_msm_set_clock - Called with (host->lock) spinlock held. */
> +static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
> + int rc;
> +
> + if (!clock) {
> + msm_host->clk_rate = clock;
> + goto out;
> + }
> +
> + spin_unlock_irq(&host->lock);
> +
> + rc = clk_set_rate(msm_host->clk, clock);
> + if (rc) {
> + pr_err("%s: Failed to set clock at rate %u\n",
> + mmc_hostname(host->mmc), clock);
> + goto out_lock;
> + }
> + msm_host->clk_rate = clock;
> + pr_debug("%s: Setting clock at rate %lu\n",
> + mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
> +
> +out_lock:
> + spin_lock_irq(&host->lock);
> +out:
> + __sdhci_msm_set_clock(host, clock);
> +}
> +
> static const struct of_device_id sdhci_msm_dt_match[] = {
> { .compatible = "qcom,sdhci-msm-v4" },
> {},
> @@ -581,7 +645,7 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
> static const struct sdhci_ops sdhci_msm_ops = {
> .platform_execute_tuning = sdhci_msm_execute_tuning,
> .reset = sdhci_reset,
> - .set_clock = sdhci_set_clock,
> + .set_clock = sdhci_msm_set_clock,
> .get_min_clock = sdhci_msm_get_min_clock,
> .get_max_clock = sdhci_msm_get_max_clock,
> .set_bus_width = sdhci_set_bus_width,
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
