On Mon 14 Nov 09:52 PST 2016, Srinivas Kandagatla wrote:
> This patch adds support to PM8821 PMIC and interrupt support.
> PM8821 is companion device that supplements primary PMIC PM8921 IC.
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> ---
> Changes from v1:
> - Removed unnessary locking spotted by Bjorn
> - updated register naming to reflect PM8821
> - lot of cleanups suggested by Bjorn
> - rebased on top of Linus Walleij's pm8xxx namespace
> cleanup patch.
Looks good, just some minor style nits below.
>
> .../devicetree/bindings/mfd/qcom-pm8xxx.txt | 1 +
> drivers/mfd/qcom-pm8xxx.c | 247 ++++++++++++++++++++-
> 2 files changed, 238 insertions(+), 10 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> index 37a088f..8f1b4ec 100644
> --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt
> @@ -11,6 +11,7 @@ voltages and other various functionality to Qualcomm SoCs.
> Definition: must be one of:
> "qcom,pm8058"
> "qcom,pm8921"
> + "qcom,pm8821"
8 < 9, so move it one step up please.
>
> - #address-cells:
> Usage: required
> diff --git a/drivers/mfd/qcom-pm8xxx.c b/drivers/mfd/qcom-pm8xxx.c
[..]
> +#define PM8821_SSBI_REG_ADDR_IRQ_BASE 0x100
> +#define PM8821_SSBI_REG_ADDR_IRQ_MASTER0 (PM8821_SSBI_REG_ADDR_IRQ_BASE + 0x30)
> +#define PM8821_SSBI_REG_ADDR_IRQ_MASTER1 (PM8821_SSBI_REG_ADDR_IRQ_BASE + 0xb0)
> +#define PM8821_SSBI_REG(m, b, offset) \
> + ((m == 0) ? \
> + (PM8821_SSBI_REG_ADDR_IRQ_MASTER0 + b + offset) : \
> + (PM8821_SSBI_REG_ADDR_IRQ_MASTER1 + b + offset))
> +#define PM8821_SSBI_ADDR_IRQ_ROOT(m, b) PM8821_SSBI_REG(m, b, 0x0)
> +#define PM8821_SSBI_ADDR_IRQ_CLEAR(m, b) PM8821_SSBI_REG(m, b, 0x01)
> +#define PM8821_SSBI_ADDR_IRQ_MASK(m, b) PM8821_SSBI_REG(m, b, 0x08)
> +#define PM8821_SSBI_ADDR_IRQ_RT_STATUS(m, b) PM8821_SSBI_REG(m, b, 0x0f)
I like how this cleaned up the rest of the implementation.
[..]
> +static void pm8821_irq_block_handler(struct pm_irq_chip *chip,
> + int master, int block)
> +{
> + int pmirq, irq, i, ret;
> + unsigned int bits;
> +
> + ret = regmap_read(chip->regmap,
> + PM8821_SSBI_ADDR_IRQ_ROOT(master, block), &bits);
> + if (ret) {
> + pr_err("Failed reading %d block ret=%d", block, ret);
"Reading block %d failed ret=%d"
> + return;
> + }
> + if (!bits) {
> + pr_err("block bit set in master but no irqs: %d", block);
This seems more like a debug thing, either showing missbehaving hardware
or something odd in the driver. I think you should drop the print or
make it pr_debug().
> + return;
> + }
I would prefer that you just drop the entire if statement, it's just an
corner case optimization with a info print.
> +
> + /* Convert block offset to global block number */
> + block += (master * PM8821_BLOCKS_PER_MASTER) - 1;
> +
> + /* Check IRQ bits */
> + for (i = 0; i < 8; i++) {
> + if (bits & BIT(i)) {
> + pmirq = block * 8 + i;
> + irq = irq_find_mapping(chip->irqdomain, pmirq);
> + generic_handle_irq(irq);
> + }
> + }
> +
Empty line
> +}
> +
> +static inline void pm8821_irq_master_handler(struct pm_irq_chip *chip,
> + int master, u8 master_val)
> +{
> + int block;
> +
> + for (block = 1; block < 8; block++)
> + if (master_val & BIT(block))
> + pm8821_irq_block_handler(chip, master, block);
> +
Empty line
> +}
> +
> +static void pm8821_irq_handler(struct irq_desc *desc)
> +{
> + struct pm_irq_chip *chip = irq_desc_get_handler_data(desc);
> + struct irq_chip *irq_chip = irq_desc_get_chip(desc);
> + unsigned int master;
> + int ret;
> +
> + chained_irq_enter(irq_chip, desc);
> + ret = regmap_read(chip->regmap,
> + PM8821_SSBI_REG_ADDR_IRQ_MASTER0, &master);
> + if (ret) {
> + pr_err("Failed to re:Qad master 0 ret=%d\n", ret);
^
|
I see you're using vim :)
> + return;
> + }
> +
> + /* bits 1 through 7 marks the first 7 blocks in master 0*/
Indentation
> + if (master & GENMASK(7, 1))
> + pm8821_irq_master_handler(chip, 0, master);
> +
> + /* bit 0 marks if master 1 contains any bits */
Dito
> + if (!(master & BIT(0)))
> + goto done;
> +
> + ret = regmap_read(chip->regmap,
> + PM8821_SSBI_REG_ADDR_IRQ_MASTER1, &master);
> + if (ret) {
> + pr_err("Failed to read master 1 ret=%d\n", ret);
> + return;
"goto done;" so that we pass chained_irq_exit()
> + }
> +
> + pm8821_irq_master_handler(chip, 1, master);
> +
> +done:
> + chained_irq_exit(irq_chip, desc);
> +}
> +
[..]
> +static void pm8821_irq_mask_ack(struct irq_data *d)
> +{
> + struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
> + unsigned int pmirq = irqd_to_hwirq(d);
> + u8 block, master;
> + int irq_bit, rc;
> +
> + block = pmirq / 8;
> + master = block / PM8821_BLOCKS_PER_MASTER;
> + irq_bit = pmirq % 8;
> + block %= PM8821_BLOCKS_PER_MASTER;
> +
> + rc = regmap_update_bits(chip->regmap,
> + PM8821_SSBI_ADDR_IRQ_MASK(master, block),
> + BIT(irq_bit), BIT(irq_bit));
> +
Empty line
> + if (rc) {
> + pr_err("Failed to read/write mask IRQ:%d rc=%d\n", pmirq, rc);
"Failed to mask IRQ %d rc=%d\n"
> + return;
> + }
> +
> + rc = regmap_update_bits(chip->regmap,
> + PM8821_SSBI_ADDR_IRQ_CLEAR(master, block),
> + BIT(irq_bit), BIT(irq_bit));
> +
Empty line
> + if (rc) {
> + pr_err("Failed to read/write IT_CLEAR IRQ:%d rc=%d\n",
> + pmirq, rc);
"Failed to clear IRQ %d rc=%d\n"
> + }
> +
Empty line
> +}
> +
> +static void pm8821_irq_unmask(struct irq_data *d)
> +{
> + struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
> + unsigned int pmirq = irqd_to_hwirq(d);
> + int irq_bit, rc;
> + u8 block, master;
> +
> + block = pmirq / 8;
> + master = block / PM8821_BLOCKS_PER_MASTER;
> + irq_bit = pmirq % 8;
> + block %= PM8821_BLOCKS_PER_MASTER;
> +
> + rc = regmap_update_bits(chip->regmap,
> + PM8821_SSBI_ADDR_IRQ_MASK(master, block),
> + BIT(irq_bit), ~BIT(irq_bit));
> +
Empty line
> + if (rc)
> + pr_err("Failed to read/write unmask IRQ:%d rc=%d\n", pmirq, rc);
"Failed to unmask IRQ %d rc=%d\n"
> +
Empty line
> +}
> +
> +static int pm8821_irq_get_irqchip_state(struct irq_data *d,
> + enum irqchip_irq_state which,
> + bool *state)
> +{
> + struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
> + int rc, pmirq = irqd_to_hwirq(d);
> + u8 block, irq_bit, master;
> + unsigned int bits;
> +
> + block = pmirq / 8;
> + master = block / PM8821_BLOCKS_PER_MASTER;
> + irq_bit = pmirq % 8;
> + block %= PM8821_BLOCKS_PER_MASTER;
> +
> + rc = regmap_read(chip->regmap,
> + PM8821_SSBI_ADDR_IRQ_RT_STATUS(master, block), &bits);
> + if (rc) {
> + pr_err("Failed Reading Status rc=%d\n", rc);
Odd capitalization, I suggest that you match it to the other functions
by:
"Reading status of IRQ %d failed rc=%d\n"
> + return rc;
> + }
> +
> + *state = !!(bits & BIT(irq_bit));
> +
> + return rc;
> +}
> +
[..]
>
> static int pm8xxx_probe(struct platform_device *pdev)
> {
> + const struct of_device_id *match;
> + const struct pm_irq_data *data;
> struct regmap *regmap;
> int irq, rc;
> unsigned int val;
> u32 rev;
> struct pm_irq_chip *chip;
> - unsigned int nirqs = PM8XXX_NR_IRQS;
> +
> + match = of_match_node(pm8xxx_id_table, pdev->dev.of_node);
> + if (!match) {
> + dev_err(&pdev->dev, "No matching driver data found\n");
> + return -EINVAL;
> + }
> +
> + data = match->data;
data = of_device_get_match_data(&pdev->dev); (from of_device.h)
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
