This series provides basic support for the Nexus 5X / 6P with the goal of getting as much of the phone running a mainline kernel. (wishful thinking...) Ideally we will be able to leverage most / significant portion of the great work being done by Linaro mainlining effort. A selection of various bits 'n pieces will be leveraged and re-used. If nothing else, this provides yet another platform to break / test / re-verify the MSM code base as it gets mainlined. -RFC in the subject was dropped when sending V5 so too was the V5 part as I wasn't sure if one needs to drop the V[x] part when dropping the RFC part. ;-( Here is V6 which based on feedback and discussion with folks at LPC it is now ready to be merged. V1: [http://lists.infradead.org/pipermail/linux-arm-kernel/2016-July/442069.html] V2: [http://www.spinics.net/lists/linux-soc/msg01059.html] V3: [http://www.spinics.net/lists/linux-soc/msg01089.html] V4: [http://www.spinics.net/lists/linux-arm-msm/msg23849.html] V5: [ http://www.spinics.net/lists/devicetree/msg147476.html ] V5->V6: - tested on the Nexus 5X and 6P using V4 of Michael Scotts pin ctrl code. - using V5 of the 8994 pin ctrl driver from here: https://patchwork.kernel.org/patch/9405773/ - clock controller name and compatible string updates, moved under soc - removed clock-output-names in DTS’s - v2 references in GCC deleted as V1 hardware never shipped therefor its not needed - model and compatible strings updated for both 5X and 6P - minor label update / removal for ‘soc’ - removal of the 8994 - v2 DTS file as its the only version that has shipped. - global clock for 8994 / 8992: format hex to lower case As explicitly stated in V1 this is just a starting point and the plan is to continue adding updating support for more peripherals / components. Ideally this starting point will allow others to help in the forward porting effort. Again, thank you everyone for your feedback thus far it is greatly appreciated. Bastian Köcher (2): msm8994 clocks: global clock support for msm8994 SOC. arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support Jeremy McNicoll (4): arm64: dts: msm8992 SoC and LG Bullhead (Nexus 5X) support dt-bindings: qcom: clocks: Add msm8994 clock bindings dt-bindings: qcom: Add msm899(2/4) bindings arm64: configs: enable configs for msm899(2/4) basic support Documentation/devicetree/bindings/arm/qcom.txt | 2 + .../devicetree/bindings/clock/qcom,gcc.txt | 1 + arch/arm64/boot/dts/qcom/Makefile | 7 +- .../boot/dts/qcom/msm8992-bullhead-rev-101.dts | 41 + arch/arm64/boot/dts/qcom/msm8992-pins.dtsi | 38 + arch/arm64/boot/dts/qcom/msm8992.dtsi | 184 ++ .../arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 40 + arch/arm64/boot/dts/qcom/msm8994-pins.dtsi | 38 + arch/arm64/boot/dts/qcom/msm8994.dtsi | 216 ++ arch/arm64/configs/defconfig | 2 + drivers/clk/qcom/Kconfig | 7 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-msm8994.c | 2301 ++++++++++++++++++++ include/dt-bindings/clock/qcom,gcc-msm8994.h | 145 ++ 14 files changed, 3021 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8992-pins.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8992.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts create mode 100644 arch/arm64/boot/dts/qcom/msm8994-pins.dtsi create mode 100644 arch/arm64/boot/dts/qcom/msm8994.dtsi create mode 100644 drivers/clk/qcom/gcc-msm8994.c create mode 100644 include/dt-bindings/clock/qcom,gcc-msm8994.h -- 2.9.2 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
