On Thu 03 Nov 02:13 PDT 2016, Linus Walleij wrote:
> Some nodes are referencing the pm8058_gpio as IRQ parent, but
> the HW IRQ offset they are supplying is actually that for the
> parent to that controller: the PM8058 itself. Since that is the
> proper parent, reference it directly.
>
> We can switch this to the pm8058_gpio and the proper offset
> once we have fixed the SSBI GPIO driver to properly deal with
> the hierarchical IRQ domain and get proper local offset
> translation.
>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Acked-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Regards,
Bjorn
> ---
> arch/arm/boot/dts/qcom-apq8060-dragonboard.dts | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> index 4a532ddab53a..ea660ffa03ea 100644
> --- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> +++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
> @@ -369,8 +369,8 @@
> ak8975@0c {
> compatible = "asahi-kasei,ak8975";
> reg = <0x0c>;
> - /* GPIO33 has interrupt 224 on the PM8058 */
> - interrupt-parent = <&pm8058_gpio>;
> + /* FIXME: GPIO33 has interrupt 224 on the PM8058 */
> + interrupt-parent = <&pm8058>;
> interrupts = <224 IRQ_TYPE_EDGE_RISING>;
> pinctrl-names = "default";
> pinctrl-0 = <&dragon_ak8975_gpios>;
> @@ -380,8 +380,8 @@
> bmp085@77 {
> compatible = "bosch,bmp085";
> reg = <0x77>;
> - /* GPIO16 has interrupt 207 on the PM8058 */
> - interrupt-parent = <&pm8058_gpio>;
> + /* FIXME: GPIO16 has interrupt 207 on the PM8058 */
> + interrupt-parent = <&pm8058>;
> interrupts = <207 IRQ_TYPE_EDGE_RISING>;
> reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
> pinctrl-names = "default";
> --
> 2.7.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
