On 09/29, Rajendra Nayak wrote: > Some PLLs can support an HW FSM mode (different from the Votable FSMs, > though its the same bit used to enable Votable FSMs as well as HW FSMs) > which enables the HW to do the bypass/reset/enable-output-ctrl sequence > on its own. So all thats needed from SW is to set the FSM_ENA bit. > PLL_ACTIVE_FLAG is whats used to check if the PLL is active/enabled. > > Some of the PLLs which support HW FSM can also need an OFFLINE request > that needs to be toggled across the enable/disable. We use a flag to > identify such cases and handle them. > > Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx> > --- Applied to clk-next -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
