Add a driver for the A53 Clock Controller. It is a hardware block that
implements a combined mux and half integer divider functionality. It can
choose between a fixed-rate clock or the dedicated A53 PLL. The source
and the divider can be set both at the same time.
This is required for enabling CPU frequency scaling on platforms like
MSM8916.
Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
---
.../devicetree/bindings/clock/qcom,a53cc.txt | 23 ++++
drivers/clk/qcom/Kconfig | 8 ++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/a53cc.c | 152 +++++++++++++++++++++
4 files changed, 184 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,a53cc.txt
create mode 100644 drivers/clk/qcom/a53cc.c
diff --git a/Documentation/devicetree/bindings/clock/qcom,a53cc.txt b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
new file mode 100644
index 000000000000..82d1634a2713
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,a53cc.txt
@@ -0,0 +1,23 @@
+Qualcomm A53 CPU Clock Controller Binding
+------------------------------------------------
+The A53 CPU Clock Controller is hardware, which provides a combined
+mux and divider functionality for the CPU clocks. It can choose between
+a fixed rate clock and the dedicated A53 PLL. This hardware block is used
+on platforms such as msm8916.
+
+Required properties :
+- compatible : shall contain:
+
+ "qcom,a53cc-msm8916"
+
+- reg : shall contain base register location and length
+ of the APCS region
+- #clock-cells : shall contain 1
+
+Example:
+
+ apcs: syscon@b011000 {
+ compatible = "qcom,a53cc-msm8916";
+ reg = <0x0b011000 0x1000>;
+ #clock-cells = <1>;
+ };
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index a889f0b14b54..59dfcdc340e4 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -159,3 +159,11 @@ config QCOM_A53PLL
support for CPU frequencies above 1GHz.
Say Y if you want to support CPU frequency scaling on devices
such as MSM8916.
+
+config QCOM_A53CC
+ bool "A53 Clock Controller"
+ depends on COMMON_CLK_QCOM && QCOM_A53PLL
+ help
+ Support for the A53 clock controller on some Qualcomm devices.
+ Say Y if you want to support CPU frequency scaling on devices
+ such as MSM8916.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index d3e142e577b0..980a5d729aa4 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -30,4 +30,5 @@ obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
+obj-$(CONFIG_QCOM_A53CC) += a53cc.o
obj-$(CONFIG_QCOM_A53PLL) += a53-pll.o
diff --git a/drivers/clk/qcom/a53cc.c b/drivers/clk/qcom/a53cc.c
new file mode 100644
index 000000000000..f9b19939e8ae
--- /dev/null
+++ b/drivers/clk/qcom/a53cc.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2016, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap.h"
+#include "clk-regmap-mux-div.h"
+
+enum {
+ P_GPLL0,
+ P_A53PLL,
+};
+
+static const struct parent_map gpll0_a53cc_map[] = {
+ { P_GPLL0, 4 },
+ { P_A53PLL, 5 },
+};
+
+static const char * const gpll0_a53cc[] = {
+ "gpll0_vote",
+ "a53pll",
+};
+
+static const struct regmap_config a53cc_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x1000,
+ .fast_io = true,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+/*
+ * We use the notifier function for switching to a temporary safe configuration
+ * (mux and divider), while the a53 pll is reconfigured.
+ */
+static int a53cc_notifier_cb(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
+ int ret = 0;
+ struct clk_regmap_mux_div *md = container_of(nb,
+ struct clk_regmap_mux_div,
+ clk_nb);
+ if (event == PRE_RATE_CHANGE)
+ /* set the mux and divider to safe frequency (400mhz) */
+ ret = __mux_div_set_src_div(md, 4, 3);
+
+ return notifier_from_errno(ret);
+}
+
+static const struct of_device_id qcom_a53cc_match_table[] = {
+ { .compatible = "qcom,a53cc-msm8916" },
+ { }
+};
+
+static int qcom_a53cc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct clk_regmap_mux_div *a53cc;
+ struct resource *res;
+ void __iomem *base;
+ struct clk *pclk;
+ struct regmap *regmap;
+ struct clk_init_data init = { };
+ int ret;
+
+ a53cc = devm_kzalloc(dev, sizeof(*a53cc), GFP_KERNEL);
+ if (!a53cc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ a53cc->reg_offset = 0x50;
+ a53cc->hid_width = 5;
+ a53cc->hid_shift = 0;
+ a53cc->src_width = 3;
+ a53cc->src_shift = 8;
+ a53cc->parent_map = gpll0_a53cc_map;
+
+ init.name = "a53mux";
+ init.parent_names = gpll0_a53cc;
+ init.num_parents = 2;
+ init.ops = &clk_regmap_mux_div_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ a53cc->clkr.hw.init = &init;
+
+ pclk = __clk_lookup(gpll0_a53cc[1]);
+ if (!pclk)
+ return -EPROBE_DEFER;
+
+ a53cc->clk_nb.notifier_call = a53cc_notifier_cb;
+ ret = clk_notifier_register(pclk, &a53cc->clk_nb);
+ if (ret) {
+ dev_err(dev, "failed to register clock notifier: %d\n", ret);
+ return ret;
+ }
+
+ regmap = devm_regmap_init_mmio(dev, base, &a53cc_regmap_config);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ dev_err(dev, "failed to init regmap mmio: %d\n", ret);
+ goto err;
+ }
+
+ a53cc->clkr.regmap = regmap;
+
+ ret = devm_clk_register_regmap(dev, &a53cc->clkr);
+ if (ret) {
+ dev_err(dev, "failed to register regmap clock: %d\n", ret);
+ goto err;
+ }
+
+ ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get,
+ &a53cc->clkr.hw);
+ if (ret) {
+ dev_err(dev, "failed to add clock provider: %d\n", ret);
+ goto err;
+ }
+
+ return 0;
+err:
+ clk_notifier_unregister(pclk, &a53cc->clk_nb);
+ return ret;
+}
+
+static struct platform_driver qcom_a53cc_driver = {
+ .probe = qcom_a53cc_probe,
+ .driver = {
+ .name = "qcom-a53cc",
+ .of_match_table = qcom_a53cc_match_table,
+ },
+};
+
+builtin_platform_driver(qcom_a53cc_driver);
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
