Re: [V4, 1/3] ACPI, PCI, IRQ: assign ISA IRQ directly during early boot stages

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24 October 2016 at 15:17, Sinan Kaya <okaya@xxxxxxxxxxxxxx> wrote:
> Thanks,
>
> On 10/22/2016 11:48 PM, Jonathan Liu wrote:
>> This series fixes one or more network adapters not working in Linux
>> 32-bit x86 guest running inside VirtualBox if I have 4 network
>> adapters enabled. The following message no longer appears in the
>> kernel log:
>> ACPI: No IRQ available for PCI Interrupt Link [LNKD]. Try pci=noacpi or acpi=off
>>
>> Tested-by: Jonathan Liu <net147@xxxxxxxxx>
>
> I'm hoping that you can retest V5 so that Rafael can pull in your tested-by into
> the commit message.
>
> --
> Sinan Kaya
> Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
> Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

Sure. Please CC me when you submit V5.

Regards,
Jonathan
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux