On 2016-10-19 10:45, Vivek Gautam wrote:
Hi,
On Wed, Oct 19, 2016 at 1:43 AM, Subhash Jadavani
<subhashj@xxxxxxxxxxxxxx> wrote:
On 2016-10-18 07:28, Vivek Gautam wrote:
Add phy clock enable code to phy_power_on/off callbacks, and
remove explicit calls to enable these phy clocks from the
ufs-qcom hcd driver.
Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
---
Changes since v1:
- staticized ufs_qcom_phy_enable(/disable)_ref_clk(),
- staticized ufs_qcom_phy_enable(/disable)_iface_clk()
- removed function declaration and export symbol for these APIs.
[snip]
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -1112,17 +1112,6 @@ static int ufs_qcom_setup_clocks(struct
ufs_hba
*hba, bool on)
return 0;
if (on) {
- err =
ufs_qcom_phy_enable_iface_clk(host->generic_phy);
- if (err)
- goto out;
-
- err = ufs_qcom_phy_enable_ref_clk(host->generic_phy);
- if (err) {
- dev_err(hba->dev, "%s enable phy ref clock
failed,
err=%d\n",
- __func__, err);
-
ufs_qcom_phy_disable_iface_clk(host->generic_phy);
- goto out;
- }
Now that you are moving these ref clk enable/disable to
phy_power_on/off and
these phy_power_on/off are called only in runtime suspend/resume (3
seconds
after last UFS access).
Goal is to disable the phy reference clock during aggressive gating
(10ms
from last UFS access) so shouldn't we call the phy_power_on/off from
these
setup_clocks() function as well?
So setup_clocks() is called for aggressive clock gating as well ?
If that's the case then yes, we may need to call. But we should try to
understand here. The phy_power_off turns off all the clocks - reflclk,
and other interface clocks. Do we want all of them to be turned off ?
Yes, we want to turn off the ref clock (& other clocks) during
aggressive gating.
phy_power_off will also turn off the PHY. Do we want all this for
aggressive
clock gating ?
Yes, PHY rails can be powered off both during the aggressive clk gating
and runtime suspend. But as the regulator on/off latencies could be
higher (especially for the shared rail), we were turning them off doing
it in runtime suspend only (via phy_power_off()).
Now that phy_power_on/off is managing both clocks and regulators, and we
will really want to turn off the ref clocks during clock gating, there
is no option but to call phy_power_on/off during aggressive gating.
[snip]
Regards
Vivek
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
