Re: [PATCH 2/2] ARM: dts: add SMSC ethernet on the APQ8060 Dragonboard

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/18, Linus Walleij wrote:
> @@ -167,6 +190,41 @@
>  					bias-pull-up;
>  				};
>  			};
> +
> +			dragon_ebi2_pins: ebi2 {
> +				/*
> +				 * Pins used by EBI2 on the Dragonboard, actually only
> +				 * only CS2 is used by a real peripheral. CS0 is just
> +				 * routed to a test point.
> +				 */
> +				mux0 {
> +					/*
> +					 * Pins used by EBI2 on the Dragonboard, actually only
> +					 * only CS2 is used by a real peripheral. CS0 is just
> +					 * routed to a test point.
> +					 */

Same comment twice? Plus it says "only only CS2", so we probably
want to drop one "only".

> +					pins =
> +					    /* "gpio39", CS1A_N this is not good to mux */
> +					    "gpio40", /* CS2A_N */
> +					    "gpio134"; /* CS0_N testpoint TP29 */

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux