[PATCH 1/8] PM / Domains: Make genpd state allocation dynamic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Allow PM Domain states to be defined dynamically by the drivers. This
removes the limitation on the maximum number of states possible for a
domain.

Cc: Axel Haslam <ahaslam+renesas@xxxxxxxxxxxx>
Suggested-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Lina Iyer <lina.iyer@xxxxxxxxxx>
---
 arch/arm/mach-imx/gpc.c     | 17 ++++++++++-------
 drivers/base/power/domain.c | 10 ----------
 include/linux/pm_domain.h   |  4 +---
 3 files changed, 11 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index 0df062d..b92dad5 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -380,13 +380,6 @@ static struct pu_domain imx6q_pu_domain = {
 		.name = "PU",
 		.power_off = imx6q_pm_pu_power_off,
 		.power_on = imx6q_pm_pu_power_on,
-		.states = {
-			[0] = {
-				.power_off_latency_ns = 25000,
-				.power_on_latency_ns = 2000000,
-			},
-		},
-		.state_count = 1,
 	},
 };
 
@@ -430,6 +423,16 @@ static int imx_gpc_genpd_init(struct device *dev, struct regulator *pu_reg)
 	if (!IS_ENABLED(CONFIG_PM_GENERIC_DOMAINS))
 		return 0;
 
+	imx6q_pu_domain.base.states = devm_kzalloc(dev,
+					sizeof(*imx6q_pu_domain.base.states),
+					GFP_KERNEL);
+	if (!imx6q_pu_domain.base.states)
+		return -ENOMEM;
+
+	imx6q_pu_domain.base.states[0].power_off_latency_ns = 25000;
+	imx6q_pu_domain.base.states[0].power_on_latency_ns = 2000000;
+	mx6q_pu_domain.base.state_count = 1,
+
 	pm_genpd_init(&imx6q_pu_domain.base, NULL, false);
 	return of_genpd_add_provider_onecell(dev->of_node,
 					     &imx_gpc_onecell_data);
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index e023066..740afa9 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -1325,16 +1325,6 @@ int pm_genpd_init(struct generic_pm_domain *genpd,
 		genpd->dev_ops.start = pm_clk_resume;
 	}
 
-	if (genpd->state_idx >= GENPD_MAX_NUM_STATES) {
-		pr_warn("Initial state index out of bounds.\n");
-		genpd->state_idx = GENPD_MAX_NUM_STATES - 1;
-	}
-
-	if (genpd->state_count > GENPD_MAX_NUM_STATES) {
-		pr_warn("Limiting states to  %d\n", GENPD_MAX_NUM_STATES);
-		genpd->state_count = GENPD_MAX_NUM_STATES;
-	}
-
 	/* Use only one "off" state if there were no states declared */
 	if (genpd->state_count == 0)
 		genpd->state_count = 1;
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index a09fe5c..bd1ffb9 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -19,8 +19,6 @@
 /* Defines used for the flags field in the struct generic_pm_domain */
 #define GENPD_FLAG_PM_CLK	(1U << 0) /* PM domain uses PM clk */
 
-#define GENPD_MAX_NUM_STATES	8 /* Number of possible low power states */
-
 enum gpd_status {
 	GPD_STATE_ACTIVE = 0,	/* PM domain is active */
 	GPD_STATE_POWER_OFF,	/* PM domain is off */
@@ -70,7 +68,7 @@ struct generic_pm_domain {
 	void (*detach_dev)(struct generic_pm_domain *domain,
 			   struct device *dev);
 	unsigned int flags;		/* Bit field of configs for genpd */
-	struct genpd_power_state states[GENPD_MAX_NUM_STATES];
+	struct genpd_power_state *states;
 	unsigned int state_count; /* number of states */
 	unsigned int state_idx; /* state that genpd will go to when off */
 
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux