Thanks for review,
On 16/09/16 16:41, Rob Herring wrote:
On Thu, Sep 08, 2016 at 02:04:52PM +0100, Srinivas Kandagatla wrote:
msm8916-wcd codec is found in Qualcomm msm8916 and apq8016 processors.
This codec IP is split in to two parts (Digital & Analog).
Analog part is integrated in to PMIC PM8916 and the digital part is
integrated into Application processor. Data transfer between Analog and
Digital Die is done via a internal bus called PDM.
This patch adds support to Analog part of the Codec which is integrated
into PMIC PM8916.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
.../bindings/sound/qcom,msm8916-wcd-analog.txt | 83 ++
sound/soc/codecs/Kconfig | 4 +
sound/soc/codecs/Makefile | 3 +-
sound/soc/codecs/msm8916-wcd-analog.c | 888 +++++++++++++++++++++
4 files changed, 977 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
create mode 100644 sound/soc/codecs/msm8916-wcd-analog.c
diff --git a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
new file mode 100644
index 0000000..f426c06
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
@@ -0,0 +1,83 @@
+msm8916 analog audio CODEC
+
+Bindings for codec Analog IP which is integrated in pmic pm8916,
+
+## Bindings for codec core on pmic:
+
+Required properties
+ - compatible = "qcom,msm8916-wcd-analog-codec";
I will also add pmic into this compatible so that it will be clear that
it is part of the PMIC chip.
something like "qcom,pm8916-wcd-analog-codec"
+ - reg: represents the slave base address provided to the peripheral.
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts: List of interrupts in given SPMI peripheral.
+ - interrupt-names: Names specified to above list of interrupts in same
+ order. List of supported interrupt names are:
+ "cdc_spk_cnp_int" - Speaker click and pop interrupt.
+ "cdc_spk_clip_int" - Speaker clip interrupt.
+ "cdc_spk_ocp_int" - Speaker over current protect interrupt.
+ "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1.
+ "mbhc_but_rel_det" - button release interrupt.
+ "mbhc_but_press_det" - button press event
+ "mbhc_ins_rem_det" - jack insert removal detect interrupt.
+ "mbhc_switch_int" - multi button headset interrupt.
+ "cdc_ear_ocp_int" - Earphone over current protect interrupt.
+ "cdc_hphr_ocp_int" - Headphone R over current protect interrupt.
+ "cdc_hphl_ocp_det" - Headphone L over current protect interrupt.
+ "cdc_ear_cnp_int" - earphone cnp interrupt.
+ "cdc_hphr_cnp_int" - hphr click and pop interrupt.
+ "cdc_hphl_cnp_int" - hphl click and pop interrupt.
+
+ - clocks: Handle to mclk.
+ - clock-names: should be "mclk".
+ - VDD-CDC-IO-supply: phandle to VDD_CDC_IO regulator device tree node.
+ - VDD-CDC-TX-RX-CX-supply: phandle to VDD_CDC_TX/RX/CX regulator device tree node.
+ - VDD-MICBIAS-supply: phandle of VDD_MICBIAS supply's regulator device tree node.
Lowercase please.
Ok, I will do that in next version.
+
+Optional Properties:
+- qcom,micbias1-ext-cap: present if micbias1 has external capacitor connected.
+- qcom,micbias2-ext-cap: present if micbias2 has external capacitor connected.
Explicitly state these are bool.
+
+Example:
+
+spmi_bus {
+ ...
+ msm8916_wcd_codec@f000{
audio-codec@...
Yep. Will fix it in next version.
Thanks,
srini
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
