Re: [PATCH v2 7/8] media: vidc: add Makefiles and Kconfig files

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/07/2016 01:37 PM, Stanimir Varbanov wrote:
> Makefile and Kconfig files to build the video codec driver.
> 
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@xxxxxxxxxx>
> ---
>  drivers/media/platform/qcom/Kconfig       |  8 ++++++++
>  drivers/media/platform/qcom/Makefile      |  6 ++++++
>  drivers/media/platform/qcom/vidc/Makefile | 15 +++++++++++++++
>  3 files changed, 29 insertions(+)
>  create mode 100644 drivers/media/platform/qcom/Kconfig
>  create mode 100644 drivers/media/platform/qcom/Makefile
>  create mode 100644 drivers/media/platform/qcom/vidc/Makefile
> 
> diff --git a/drivers/media/platform/qcom/Kconfig b/drivers/media/platform/qcom/Kconfig
> new file mode 100644
> index 000000000000..4bad5c0f68e4
> --- /dev/null
> +++ b/drivers/media/platform/qcom/Kconfig
> @@ -0,0 +1,8 @@
> +comment "Qualcomm V4L2 drivers"
> +
> +menuconfig QCOM_VIDC
> +        tristate "Qualcomm V4L2 encoder/decoder driver"
> +        depends on ARCH_QCOM && VIDEO_V4L2
> +        depends on IOMMU_DMA
> +        depends on QCOM_VENUS_PIL
> +        select VIDEOBUF2_DMA_SG

If at all possible, please depend on COMPILE_TEST as well!

Also missing: a patch adding an entry to the MAINTAINERS file.

Regards,

	Hans

> diff --git a/drivers/media/platform/qcom/Makefile b/drivers/media/platform/qcom/Makefile
> new file mode 100644
> index 000000000000..150892f6533b
> --- /dev/null
> +++ b/drivers/media/platform/qcom/Makefile
> @@ -0,0 +1,6 @@
> +#
> +# Makefile for the QCOM spcific video device drivers
> +# based on V4L2.
> +#
> +
> +obj-$(CONFIG_QCOM_VIDC)     += vidc/
> diff --git a/drivers/media/platform/qcom/vidc/Makefile b/drivers/media/platform/qcom/vidc/Makefile
> new file mode 100644
> index 000000000000..f8b5f9a438ee
> --- /dev/null
> +++ b/drivers/media/platform/qcom/vidc/Makefile
> @@ -0,0 +1,15 @@
> +# Makefile for Qualcomm vidc driver
> +
> +vidc-objs += \
> +		core.o \
> +		helpers.o \
> +		vdec.o \
> +		vdec_ctrls.o \
> +		venc.o \
> +		venc_ctrls.o \
> +		hfi_venus.o \
> +		hfi_msgs.o \
> +		hfi_cmds.o \
> +		hfi.o \
> +
> +obj-$(CONFIG_QCOM_VIDC) += vidc.o

I recommend renaming the module to qcom-vidc. 'vidc' is too generic.

Regards,

	Hans

> 
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux