Hi Andy/Linus W, This patchset adds support to pm8994 gpios/mpps on db820c board. DB820c board Low Speed expansion GPIO_F is connected to PM8994_GPIO5 Its better if we take this patchset from single tree, as dts patch has dependency on the dt-bindings include file. Without this patchset GPIO_F on LS expansion would be at 2.7v instead of 1.8v. Thanks, srini Srinivas Kandagatla (2): pinctrl: pm8994: add pad voltage regulator defines dts: arm64: db820c: add pmic pins specific dts file arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 15 +++++++++++++++ arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 2 ++ include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 4 ++++ include/dt-bindings/pinctrl/qcom,pmic-mpp.h | 6 ++++++ 4 files changed, 27 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
