On Wed, Sep 07, 2016 at 02:35:07PM -0700, Stephen Boyd wrote:
> The two extcon notifiers are almost the same except for the
> variable name for the cable structure and the id notifier inverts
> the cable->state logic. Make it the same and replace two
> functions with one to save some lines. This also makes it so that
> the id cable state is true when the id pin is pulled low, so we
> change the name of ->state to ->connected to properly reflect
> that we're interested in the cable being connected.
>
> Cc: Peter Chen <peter.chen@xxxxxxx>
> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> Cc: "Ivan T. Ivanov" <iivanov.xz@xxxxxxxxx>
> Signed-off-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
> ---
> drivers/usb/chipidea/core.c | 45 ++++++++++++--------------------------------
> drivers/usb/chipidea/otg.c | 8 ++++----
> include/linux/usb/chipidea.h | 4 ++--
> 3 files changed, 18 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index f144e1bbcc82..83bc2f2dd6a8 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -577,35 +577,14 @@ static irqreturn_t ci_irq(int irq, void *data)
> return ret;
> }
>
> -static int ci_vbus_notifier(struct notifier_block *nb, unsigned long event,
> - void *ptr)
> +static int ci_cable_notifier(struct notifier_block *nb, unsigned long event,
> + void *ptr)
> {
> - struct ci_hdrc_cable *vbus = container_of(nb, struct ci_hdrc_cable, nb);
> - struct ci_hdrc *ci = vbus->ci;
> + struct ci_hdrc_cable *cbl = container_of(nb, struct ci_hdrc_cable, nb);
> + struct ci_hdrc *ci = cbl->ci;
>
> - if (event)
> - vbus->state = true;
> - else
> - vbus->state = false;
> -
> - vbus->changed = true;
> -
> - ci_irq(ci->irq, ci);
> - return NOTIFY_DONE;
> -}
> -
> -static int ci_id_notifier(struct notifier_block *nb, unsigned long event,
> - void *ptr)
> -{
> - struct ci_hdrc_cable *id = container_of(nb, struct ci_hdrc_cable, nb);
> - struct ci_hdrc *ci = id->ci;
> -
> - if (event)
> - id->state = false;
> - else
> - id->state = true;
> -
> - id->changed = true;
> + cbl->connected = event;
> + cbl->changed = true;
>
> ci_irq(ci->irq, ci);
> return NOTIFY_DONE;
> @@ -714,27 +693,27 @@ static int ci_get_platdata(struct device *dev,
> }
>
> cable = &platdata->vbus_extcon;
> - cable->nb.notifier_call = ci_vbus_notifier;
> + cable->nb.notifier_call = ci_cable_notifier;
> cable->edev = ext_vbus;
>
> if (!IS_ERR(ext_vbus)) {
> ret = extcon_get_cable_state_(cable->edev, EXTCON_USB);
> if (ret)
> - cable->state = true;
> + cable->connected = true;
> else
> - cable->state = false;
> + cable->connected = false;
> }
>
> cable = &platdata->id_extcon;
> - cable->nb.notifier_call = ci_id_notifier;
> + cable->nb.notifier_call = ci_cable_notifier;
> cable->edev = ext_id;
>
> if (!IS_ERR(ext_id)) {
> ret = extcon_get_cable_state_(cable->edev, EXTCON_USB_HOST);
> if (ret)
> - cable->state = false;
> + cable->connected = true;
> else
> - cable->state = true;
> + cable->connected = false;
> }
> return 0;
> }
> diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
> index 0cf149edddd8..695f3fe3ae21 100644
> --- a/drivers/usb/chipidea/otg.c
> +++ b/drivers/usb/chipidea/otg.c
> @@ -44,7 +44,7 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
> else
> val &= ~OTGSC_BSVIS;
>
> - if (cable->state)
> + if (cable->connected)
> val |= OTGSC_BSV;
> else
> val &= ~OTGSC_BSV;
> @@ -62,10 +62,10 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask)
> else
> val &= ~OTGSC_IDIS;
>
> - if (cable->state)
> - val |= OTGSC_ID;
> + if (cable->connected)
> + val &= ~OTGSC_ID; /* host */
> else
> - val &= ~OTGSC_ID;
> + val |= OTGSC_ID; /* device */
>
> if (cable->enabled)
> val |= OTGSC_IDIE;
> diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
> index d07b162073f7..7e3daa37cf60 100644
> --- a/include/linux/usb/chipidea.h
> +++ b/include/linux/usb/chipidea.h
> @@ -12,7 +12,7 @@ struct ci_hdrc;
>
> /**
> * struct ci_hdrc_cable - structure for external connector cable state tracking
> - * @state: current state of the line
> + * @connected: true if cable is connected, false otherwise
> * @changed: set to true when extcon event happen
> * @enabled: set to true if we've enabled the vbus or id interrupt
> * @edev: device which generate events
> @@ -21,7 +21,7 @@ struct ci_hdrc;
> * @conn: used for notification registration
> */
> struct ci_hdrc_cable {
> - bool state;
> + bool connected;
> bool changed;
> bool enabled;
> struct extcon_dev *edev;
> --
Acked-by: Peter Chen <peter.chen@xxxxxxx>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
