Re: [PATCH v4 2/6] ASoC: codecs: Add msm8916-wcd digital codec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 06/09/16 12:24, Mark Brown wrote:
On Tue, Sep 06, 2016 at 10:57:41AM +0100, Srinivas Kandagatla wrote:

+static const struct soc_enum rx_mix2_inp1_chain_enum =
+SOC_ENUM_SINGLE(LPASS_CDC_CONN_RX1_B3_CTL, 0, 3, rx_mix2_text);

Indentation again.

Yep will fix it in next version.
+	case SND_SOC_DAPM_PRE_PMU:
+		if (++msm8916_wcd->dmic_clk_cnt == 1) {
+			snd_soc_update_bits(codec, dmic_clk_reg,

This looks like you're open coding a supply widget.
You are correct, the clk can go in to a supply widget in this case. I will fix it in next version.


+		if (dmic == 1)
+			snd_soc_update_bits(codec, LPASS_CDC_TX1_DMIC_CTL,
+					    TXN_DMIC_CTL_CLK_SEL_MASK,
+					    TXN_DMIC_CTL_CLK_SEL_DIV3);
+		if (dmic == 2)
+			snd_soc_update_bits(codec, LPASS_CDC_TX2_DMIC_CTL,
+					    TXN_DMIC_CTL_CLK_SEL_MASK,
+					    TXN_DMIC_CTL_CLK_SEL_DIV3);

This looks like you want a switch statement.
Ok, will do in next versions.

+static int msm8916_wcd_digital_enable_clock_block(struct snd_soc_codec
+						  *codec, int enable)
+{

+static int msm8916_wcd_digital_codec_remove(struct snd_soc_codec *codec)
+{
+	return 0;
+}

Remove empty functions.
Agree.

+static int msm8916_wcd_digital_startup(struct snd_pcm_substream *substream,
+				       struct snd_soc_dai *dai)
+{
+	msm8916_wcd_digital_enable_clock_block(dai->codec, 1);
+	return 0;
+}
+
+static void msm8916_wcd_digital_shutdown(struct snd_pcm_substream *substream,
+					 struct snd_soc_dai *dai)
+{
+	msm8916_wcd_digital_enable_clock_block(dai->codec, 0);
+}

Two problems here: one is that the power management should be in DAPM,
the other is that the _enable_clock_block() function is totally
pointless - it has only these two call locations and there is absolutely
no shared code between the enable and disable paths so they should just
be inlined.

Ok, I will inline the code in next verions.
+static int msm8916_wcd_digital_remove(struct platform_device *pdev)
+{
+	struct msm8916_wcd_digital_priv *priv = dev_get_drvdata(&pdev->dev);
+
+	clk_disable_unprepare(priv->mclk);
+	clk_disable_unprepare(priv->ahbclk);
+	snd_soc_unregister_codec(&pdev->dev);

This is disabling the clocks while the CODEC is still registered and
might be in use, you should unregister first.
Agree, Will change the order in next version.

+static const struct of_device_id msm8916_wcd_digital_match_table[] = {
+	{.compatible = "qcom,msm8916-wcd-digital-codec"},
+	{}

Spaces please.

Yep.

+static struct platform_driver msm8916_wcd_digital_driver = {
+	.driver = {
+		   .name = "msm8916-wcd-digital-codec",
+		   .of_match_table = msm8916_wcd_digital_match_table,
+		   },

Please line up the }.
Yep.

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux