In ath10k_snoc_hif_stop() we skip disabling the IRQs in the crash
recovery flow, but we still unconditionally call enable again in
ath10k_snoc_hif_start().
We can't check the ATH10K_FLAG_CRASH_FLUSH bit since it is cleared
before hif_start() is called, so instead check the
ATH10K_SNOC_FLAG_RECOVERY flag and skip enabling the IRQs during crash
recovery.
This fixes unbalanced IRQ enable splats that happen after recovering from
a crash.
Fixes: 0e622f67e041 ("ath10k: add support for WCN3990 firmware crash recovery")
Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/snoc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c
index de96c3939ea6..01e26f259fdf 100644
--- a/drivers/net/wireless/ath/ath10k/snoc.c
+++ b/drivers/net/wireless/ath/ath10k/snoc.c
@@ -936,9 +936,11 @@ static int ath10k_snoc_hif_start(struct ath10k *ar)
bitmap_clear(ar_snoc->pending_ce_irqs, 0, CE_COUNT_MAX);
dev_set_threaded(ar->napi_dev, true);
ath10k_core_napi_enable(ar);
- ath10k_snoc_irq_enable(ar);
+ /* IRQs are left enabled when we restart due to a firmware crash */
+ if (!test_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags))
+ ath10k_snoc_irq_enable(ar);
ath10k_snoc_rx_post(ar);
clear_bit(ATH10K_SNOC_FLAG_RECOVERY, &ar_snoc->flags);
--
2.48.1
