On 3/18/2025 8:03 PM, Konrad Dybcio wrote:
> On 3/18/25 3:24 PM, Vikash Garodia wrote:
>>
>> On 3/15/2025 7:13 PM, Konrad Dybcio wrote:
>>> On 3/11/25 1:03 PM, Vikash Garodia wrote:
>>>> Video node enables video on Qualcomm SA8775P platform.
>>>>
>>>> Signed-off-by: Vikash Garodia <quic_vgarodia@xxxxxxxxxxx>
>>>> ---
>>>> arch/arm64/boot/dts/qcom/sa8775p.dtsi | 67 +++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 67 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>>> index 3394ae2d13003417a15e64c9e47833725ec779e6..09db8e2eb578f1cada0f4a15e3f844dc097bd46d 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
>>>> @@ -10,6 +10,7 @@
>>>> #include <dt-bindings/clock/qcom,sa8775p-dispcc.h>
>>>> #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
>>>> #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
>>>> +#include <dt-bindings/clock/qcom,sa8775p-videocc.h>
>>>> #include <dt-bindings/dma/qcom-gpi.h>
>>>> #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
>>>> #include <dt-bindings/mailbox/qcom-ipcc.h>
>>>> @@ -3783,6 +3784,72 @@ llcc: system-cache-controller@9200000 {
>>>> interrupts = <GIC_SPI 580 IRQ_TYPE_LEVEL_HIGH>;
>>>> };
>>>>
>>>> + iris: video-codec@aa00000 {
>>>> + compatible = "qcom,sa8775p-iris";
>>>> +
>>>> + reg = <0 0x0aa00000 0 0xf0000>;
>>>> + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
>>>> +
>>>> + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
>>>> + <&videocc VIDEO_CC_MVS0_GDSC>,
>>>> + <&rpmhpd SA8775P_MXC>,
>>>> + <&rpmhpd SA8775P_MMCX>;
>>>> + power-domain-names = "venus",
>>>> + "vcodec0",
>>>> + "mx",
>>>> + "mmcx";
>>>> + operating-points-v2 = <&iris_opp_table>;
>>>> +
>>>> + clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
>>>> + <&videocc VIDEO_CC_MVS0C_CLK>,
>>>> + <&videocc VIDEO_CC_MVS0_CLK>;
>>>> + clock-names = "iface",
>>>> + "core",
>>>> + "vcodec0_core";
>>>> +
>>>> + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
>>>> + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ALWAYS>,
>>>
>>> This path should use QCOM_ICC_TAG_ACTIVE_ONLY on both endpoints
>> What is the advantage of "ALWAYS" vs "ACTIVE_ONLY". Thinking of a possibility of
>> APSS power collapsed, while video hardware is processing a frame ?
>
> That's totally okay, I'm requesting ACTIVE_ONLY just on the cpu-cfg path,
> which must not be used if APSS if offline anyway
Agree on the CFG path. Will update in next version.
>
> Konrad
