From: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
Add UFS host controller and PHY nodes for SM8750 MTP board.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Co-developed-by: Manish Pandey <quic_mapa@xxxxxxxxxxx>
Signed-off-by: Manish Pandey <quic_mapa@xxxxxxxxxxx>
Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8750-mtp.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 9e3aacad7bdab6848e86f8e45e04907e1c752a07..9d34159e73948e7f3f939593d1ace444cc5dcd15 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -792,3 +792,21 @@ &tlmm {
&uart7 {
status = "okay";
};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1j_0p91>;
+ vdda-pll-supply = <&vreg_l3g_1p2>;
+
+ status = "okay";
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 215 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1d_1p2>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
--
2.46.1
