The patch below added regulator supplies to the ADV533 HDMI bridge on the DB410c, but the corresponding DT binding doc wasn't updated to list them: https://patchwork.kernel.org/patch/9180609/ The first patch adds the props to the binding docs. The second patch updates the drm bridge driver to enable these regulators. The third patch updates the regulator supply voltages as needed by the HDMI bridge. Archit Taneja (3): dt-bindings: drm/bridge: adv7511: Add regulators for ADV7533 drm/bridge: adv7533: Initialize regulators arm64: dts: apq8016-sbc: Set up LDO2, LDO6 and LDO17 regulator voltage ranges .../bindings/display/bridge/adi,adv7511.txt | 6 +++ arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 +++--- drivers/gpu/drm/bridge/adv7511/adv7511.h | 16 ++++++++ drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 34 +++++++++++----- drivers/gpu/drm/bridge/adv7511/adv7533.c | 45 ++++++++++++++++++++++ 5 files changed, 98 insertions(+), 15 deletions(-) -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
