With PWRSTS_OFF_ON, USB GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of USB controller from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Fixes: c58225b7e3d7 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
drivers/clk/qcom/gcc-sm8650.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/qcom/gcc-sm8650.c b/drivers/clk/qcom/gcc-sm8650.c
index 9dd5c48f33bed5b944a0b25959ef69e7862d0449..fa1672c4e7d814e1e08c79f9cda9463bf1cd1598 100644
--- a/drivers/clk/qcom/gcc-sm8650.c
+++ b/drivers/clk/qcom/gcc-sm8650.c
@@ -3497,7 +3497,7 @@ static struct gdsc usb30_prim_gdsc = {
.pd = {
.name = "usb30_prim_gdsc",
},
- .pwrsts = PWRSTS_OFF_ON,
+ .pwrsts = PWRSTS_RET_ON,
.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
@@ -3506,7 +3506,7 @@ static struct gdsc usb3_phy_gdsc = {
.pd = {
.name = "usb3_phy_gdsc",
},
- .pwrsts = PWRSTS_OFF_ON,
+ .pwrsts = PWRSTS_RET_ON,
.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
};
---
base-commit: 7ec162622e66a4ff886f8f28712ea1b13069e1aa
change-id: 20250305-topic-sm8650-upstream-fix-usb-suspend-20979d5a0170
Best regards,
--
Neil Armstrong <neil.armstrong@xxxxxxxxxx>
