On 3/4/2025 3:18 PM, Dmitry Baryshkov wrote:
> On Tue, 4 Mar 2025 at 10:45, Ayushi Makhija <quic_amakhija@xxxxxxxxxxx> wrote:
>>
>> On 2/25/2025 11:25 PM, Dmitry Baryshkov wrote:
>>> On Tue, Feb 25, 2025 at 05:48:21PM +0530, Ayushi Makhija wrote:
>>>> Enable both DSI to DP bridge ports on SA8775P Ride plaftrom.
>>>>
>>>> Signed-off-by: Ayushi Makhija <quic_amakhija@xxxxxxxxxxx>
>>>> ---
>>>> arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 66 +++++++++++++++++++++-
>>>> 1 file changed, 64 insertions(+), 2 deletions(-)
>>>
>>> Please squash into the previous patch. It doesn't make a lot of sense separately.
>>>
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>>>> index 151f66512303..02d8a9c2c909 100644
>>>> --- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>>>> +++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
>>>> @@ -128,6 +128,30 @@ dp1_connector_in: endpoint {
>>>> };
>>>> };
>>>> };
>>>> +
>>>> + dsi0-connector {
>>>
>>> dpN-connector. It is not DSI.
>>
>> Hi Dmitry, Konrad
>>
>> Thanks, for the review.
>>
>> I will change dsi0-connector -> dp2-connector and dsi1-connector -> dp3-connector respectively.
>
> Why? It's then dp-dsi0-connector. I think the board has DP2 and DP3
> (please correct me if I'm wrong). How would you name those if you use
> those indices for DSI connectors?
>
Hi Dmitry,
Thanks, for the review.
yes, you are correct there are total 4 DP connectors and 2 DSI to DP connectors on the device, better to keep the node name as
dp-dsi0-connector and dp-dsi1-connector respectively.
Thanks,
Ayushi
