On 04/03/2025 09:36, Jorge Ramirez wrote: > On 03/03/25 18:13:20, Krzysztof Kozlowski wrote: >> On 08/02/2025 23:51, Vikram Sharma wrote: >>> The Vision Mezzanine for the Qualcomm RB3 Gen 2 ships with an imx577 >>> camera sensor. Enable IMX577 on the vision mezzanine. >>> >>> An example media-ctl pipeline for the imx577 is: >>> >>> media-ctl --reset >>> media-ctl -V '"imx577 '17-001a'":0[fmt:SRGGB10/4056x3040 field:none]' >> >> AFAIU, camss does not support SRGGB10, but only SRGGB10P. >> >> Based on tests reported on IRC I think this might not have been tested >> correctly. > > I acquired SRGGB10P (10 bit packed) frames from the camera despite the > pipeline being set to SRGGB10 (16 bit) samples. > > so something does not add up. Then the commands are actually correct, just the camss or media behave here a bit unexpected? Best regards, Krzysztof
