On Wed, Feb 26, 2025 at 04:17:50PM -0800, Bjorn Andersson wrote:
> When the core is integrated with glue, it's reasonable to assume that
> the glue driver will have to touch the IP before/after the core takes
> the hardware out and into reset. As such the glue must own these
> resources and be allowed to turn them on/off outside the core's
> handling.
>
> Allow the platform or glue layer to indicate if the core logic for
> clocks and resets should be skipped to deal with this.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxxxx>
> ---
> drivers/usb/dwc3/core.c | 19 +++++++++++--------
> drivers/usb/dwc3/glue.h | 1 +
> 2 files changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index d9f0a6782d36..aecdde8dc999 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -2328,6 +2330,7 @@ static int dwc3_probe(struct platform_device *pdev)
>
> probe_data.dwc = dwc;
> probe_data.res = res;
> + probe_data.ignore_clocks_and_resets = false;
Isn't it a default value?
>
> return dwc3_core_probe(&probe_data);
> }
> diff --git a/drivers/usb/dwc3/glue.h b/drivers/usb/dwc3/glue.h
> index e73cfc466012..1ddb451bdbd0 100644
> --- a/drivers/usb/dwc3/glue.h
> +++ b/drivers/usb/dwc3/glue.h
> @@ -17,6 +17,7 @@
> struct dwc3_probe_data {
> struct dwc3 *dwc;
> struct resource *res;
> + bool ignore_clocks_and_resets;
> };
>
> int dwc3_core_probe(const struct dwc3_probe_data *data);
>
> --
> 2.45.2
>
--
With best wishes
Dmitry
