On Tue, Feb 25, 2025 at 05:48:24PM +0530, Ayushi Makhija wrote: > Use gpiod_set_value_cansleep() instead of gpiod_set_value() > to fix the below call trace in the boot log: > > [ 5.690534] Call trace: > [ 5.690536] gpiod_set_value+0x40/0xa4 > [ 5.690540] anx7625_runtime_pm_resume+0xa0/0x324 [anx7625] > [ 5.690545] __rpm_callback+0x48/0x1d8 > [ 5.690549] rpm_callback+0x6c/0x78 > > Certain GPIO controllers require access via message-based buses > such as I2C or SPI, which may cause the GPIOs to enter a sleep > state. Therefore, use the gpiod_set_value_cansleep(). > > Signed-off-by: Ayushi Makhija <quic_amakhija@xxxxxxxxxxx> > --- > drivers/gpu/drm/bridge/analogix/anx7625.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> -- With best wishes Dmitry
