On 24.02.2025 11:04 AM, Abhinaba Rakshit wrote:
> Add the QCE and Crypto BAM DMA nodes.
>
> Signed-off-by: Abhinaba Rakshit <quic_arakshit@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/qcs615.dtsi | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> index f4abfad474ea62dea13d05eb874530947e1e8d3e..25e98d20ec1d941f0b45cc3d94f298065c9a5566 100644
> --- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
> +++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
> @@ -1114,6 +1114,31 @@ ufs_mem_phy: phy@1d87000 {
> status = "disabled";
> };
>
> + cryptobam: dma-controller@1dc4000 {
> + compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
> + reg = <0x0 0x01dc4000 0x0 0x24000>;
> + interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
> + #dma-cells = <1>;
> + qcom,ee = <0>;
> + qcom,controlled-remotely;
> + num-channels = <16>;
> + qcom,num-ees = <4>;
> + iommus = <&apps_smmu 0x0104 0x0011>,
> + <&apps_smmu 0x0114 0x0011>;
(0x0114 & ~ 0x0011) == (0x0104 & ~0x0011), try dropping the second entry
here and below and see if things still work
> + };
> +
> + crypto: crypto@1dfa000 {
> + compatible = "qcom,qcs615-qce", "qcom,sm8150-qce", "qcom,qce";
> + reg = <0x0 0x01dfa000 0x0 0x6000>;
> + dmas = <&cryptobam 4>, <&cryptobam 5>;
> + dma-names = "rx", "tx";
> + iommus = <&apps_smmu 0x0104 0x0011>,
> + <&apps_smmu 0x0114 0x0011>;
> + interconnects = <&aggre1_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
Please align the '&'s
Konrad
