On Fri, Feb 07, 2025 at 10:41:14PM +0200, Dmitry Baryshkov wrote: > Qualcomm Robotics RB1 platform uses a new member of the WCN39xx family > of BT/WiFi chips. Add support for this member of the family and enable > it to be used on the RB1 board. > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > --- > Changes in v4: > - Added empty line before status property (Konrad) > - Reword Bluetooth commit message to follow linux-firmware changes > (cmnv13t.bin and cmnv13s.bin were merged). > - Link to v3: https://lore.kernel.org/r/20250202-rb1-bt-v3-0-6797a4467ced@xxxxxxxxxx > > Changes in v3: > - Mention new firmware files. > - Link to v2: https://lore.kernel.org/r/20250201-rb1-bt-v2-0-fd44011749bb@xxxxxxxxxx > > Changes in v2: > - Corrected QUP interconnects (Konrad) > - Added /delete-property/ interrupts and an empty line before status > (Konrad) > - Enabled downloading of different NVMs as required for v1.3 of the chip. > - Link to v1: https://lore.kernel.org/r/20250201-rb1-bt-v1-0-ae896c4923d8@xxxxxxxxxx > > --- > Dmitry Baryshkov (6): > dt-bindings: net: bluetooth: qualcomm: document WCN3950 > Bluetooth: qca: simplify WCN399x NVM loading > Bluetooth: qca: add WCN3950 support Gracious ping, these patches have been sent two weeks ago. > arm64: dts: qcom: qcm2290: fix (some) of QUP interconnects > arm64: dts: qcom: qcm2290: add UART3 device > arm64: dts: qcom: qrb2210-rb1: add Bluetooth support > > .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 2 + > arch/arm64/boot/dts/qcom/qcm2290.dtsi | 31 +++++--- > arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 83 ++++++++++++++++++++++ > drivers/bluetooth/btqca.c | 27 +++++-- > drivers/bluetooth/btqca.h | 4 ++ > drivers/bluetooth/hci_qca.c | 25 +++++++ > 6 files changed, 157 insertions(+), 15 deletions(-) > --- > base-commit: a1d1e1f2fae5fcb5f2e43b81afa9596c606e683d > change-id: 20250201-rb1-bt-cec7a314991d > > Best regards, > -- > Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > -- With best wishes Dmitry
