Re: [PATCH v2 10/10] clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 08/24/2016 11:56 AM, Stephen Boyd wrote:
> On 08/11, Rajendra Nayak wrote:
>> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
>> index 2184dc1..68c90f3 100644
>> --- a/drivers/clk/qcom/clk-alpha-pll.c
>> +++ b/drivers/clk/qcom/clk-alpha-pll.c
>> @@ -113,6 +113,11 @@ static int wait_for_pll_offline(struct clk_alpha_pll *pll, u32 mask)
>>  #define PLL_OFFLINE_ACK		BIT(28)
>>  #define PLL_ACTIVE_FLAG		BIT(30)
>>  
>> +/* alpha pll with dynamic update support */
>> +#define PLL_UPDATE		BIT(22)
>> +#define PLL_HW_LOGIC_BYPASS	BIT(23)
>> +#define PLL_ACK_LATCH		BIT(29)
> 
> These need to move next to associated registers.

will do

> 
>> +
>>  void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>>  			     const struct alpha_pll_config *config)
>>  {
>> @@ -366,6 +402,7 @@ clk_alpha_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
>>  static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
>>  				  unsigned long prate)
>>  {
>> +	int enabled;
> 
> bool

sure

> 
>>  	struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>  	const struct pll_vco *vco;
>>  	u32 l, off = pll->offset;
>> @@ -378,6 +415,11 @@ static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
>>  		return -EINVAL;
>>  	}
>>  
>> +	enabled = hw->init->ops->is_enabled(hw);
> 
> We have clk_hw_is_enabled() for this.

sure, will change it to use clk_hw_is_enabled

> 
>> +
>> +	if (!(pll->flags & SUPPORTS_DYNAMIC_UPDATE) && enabled)
>> +		hw->init->ops->disable(hw);
> 
> Please call the function directly instead of going through the
> init structure to get the clk ops.

okay

> 
>> +
>>  	a <<= (ALPHA_REG_BITWIDTH - ALPHA_BITWIDTH);
>>  
>>  	regmap_write(pll->clkr.regmap, off + PLL_L_VAL, l);
>> @@ -391,6 +433,12 @@ static int clk_alpha_pll_set_rate(struct clk_hw *hw, unsigned long rate,
>>  	regmap_update_bits(pll->clkr.regmap, off + PLL_USER_CTL, PLL_ALPHA_EN,
>>  			   PLL_ALPHA_EN);
>>  
>> +	if (!(pll->flags & SUPPORTS_DYNAMIC_UPDATE) && enabled)
>> +		hw->init->ops->enable(hw);
>> +
>> +	if (pll->flags & SUPPORTS_DYNAMIC_UPDATE)
>> +		clk_alpha_pll_dynamic_update(pll);
>> +
> 
> Perhaps write it as
> 
> 	if (pll->flags & SUPPORTS_DYNAMIC_UPDATE)
> 		clk_alpha_pll_dynamic_update()
> 	else if (enabled)
> 		toggle the enable bit...

okay will update, thanks
> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux