IPQ5018 has tsens V1.0 IP with 4 sensors and 1 interrupt. There is no RPM present in the soc to do tsens early enable. Adding support for the same here. [v4] *) Documented ipq5018 in qcom,qfprom bindings *) Constrained ipq5018-tsens to one interrupt with description *) Added Rob's Acked-by tag *) Added Dmitry's Reviewed-by tag *) Fixed modpost warning: added __init to init_common *) Sorted tsens nodes by address *) Sorted thermal-zones nodes by name *) Link to v3: https://lore.kernel.org/all/20230922115116.2748804-1-srichara@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ [v3] *) Added the tsens-ipq5018 as new binding without rpm *) Added Dmitry's Reviewed tag *) Fixed Dmitry's comments for error checks in init_ipq5018 *) Ordered the qfprom device node properties *) Link to v2: https://lore.kernel.org/all/20230915121504.806672-1-quic_srichara@xxxxxxxxxxx/ [v2] *) Sorted the compatible and removed example *) Fixed the name for new tsens_feature *) Used tsend_calibrate_common instead of legacy and addressed comments from Dmitry. *) Squashed patch 3 & 4 *) Fixed node names, order and added qfprom cells for points seprately *) Squashed patch 6 & 7 *) Link to v1: https://lore.kernel.org/all/1693250307-8910-1-git-send-email-quic_srichara@xxxxxxxxxxx/ Sricharan Ramabadhran (5): dt-bindings: nvmem: Add compatible for IPQ5018 dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible thermal: drivers: qcom: Add new feat for soc without rpm thermal: qcom: tsens: Add support for IPQ5018 tsens arm64: dts: qcom: ipq5018: Add tsens node .../bindings/nvmem/qcom,qfprom.yaml | 1 + .../bindings/thermal/qcom-tsens.yaml | 2 + arch/arm64/boot/dts/qcom/ipq5018.dtsi | 169 ++++++++++++++++++ drivers/thermal/qcom/tsens-v1.c | 60 +++++++ drivers/thermal/qcom/tsens.c | 5 +- drivers/thermal/qcom/tsens.h | 5 +- 6 files changed, 240 insertions(+), 2 deletions(-) -- 2.39.5
