[PATCH v4 7/9] mmc: sdhci-msm: Implement set_clock callback for sdhci-msm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



sdhci-msm controller may have different clk-rates for each
bus speed mode. Thus implement set_clock callback for
sdhci-msm driver.

Signed-off-by: Sahitya Tummala <stummala@xxxxxxxxxxxxxx>
Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxxx>
---
 drivers/mmc/host/sdhci-msm.c | 109 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 108 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index a6280aa..853639b 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -89,6 +89,7 @@ struct sdhci_msm_host {
 	struct mmc_host *mmc;
 	bool use_14lpp_dll_reset;
 	struct sdhci_msm_pltfm_data *pdata;
+	u32 clk_rate;
 };
 
 /* Platform specific tuning */
@@ -582,6 +583,112 @@ static unsigned int sdhci_msm_get_min_clock(struct sdhci_host *host)
 	return msm_host->pdata->clk_table[0];
 }
 
+static unsigned int sdhci_msm_get_msm_clk_rate(struct sdhci_host *host,
+					u32 req_clk)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	int count = msm_host->pdata->clk_table_sz;
+	unsigned int sel_clk = -1;
+	int cnt;
+
+	if (req_clk < sdhci_msm_get_min_clock(host)) {
+		sel_clk = sdhci_msm_get_min_clock(host);
+		return sel_clk;
+	}
+
+	for (cnt = 0; cnt < count; cnt++) {
+		if (msm_host->pdata->clk_table[cnt] > req_clk) {
+			break;
+		} else if (msm_host->pdata->clk_table[cnt] == req_clk) {
+			sel_clk = msm_host->pdata->clk_table[cnt];
+			break;
+		}
+		sel_clk = msm_host->pdata->clk_table[cnt];
+	}
+	return sel_clk;
+}
+
+/**
+ * __sdhci_msm_set_clock - sdhci_msm clock control.
+ *
+ * Description:
+ * Implement MSM version of sdhci_set_clock.
+ * This is required since MSM controller does not
+ * use internal divider and instead directly control
+ * the GCC clock as per HW recommendation.
+ **/
+void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	u16 clk;
+	unsigned long timeout;
+
+	/*
+	 * Keep actual_clock as zero -
+	 * - since there is no divider used so no need of having actual_clock.
+	 * - MSM controller uses SDCLK for data timeout calculation. If
+	 *   actual_clock is zero, host->clock is taken for calculation.
+	 */
+	host->mmc->actual_clock = 0;
+
+	sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+
+	if (clock == 0)
+		return;
+
+	/*
+	 * MSM controller do not use clock divider.
+	 * Thus read SDHCI_CLOCK_CONTROL and only enable
+	 * clock with no divider value programmed.
+	 */
+	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+
+	clk |= SDHCI_CLOCK_INT_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	/* Wait max 20 ms */
+	timeout = 20;
+	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+		& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			pr_err("%s: Internal clock never stabilised.\n",
+			       mmc_hostname(host->mmc));
+			return;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	clk |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+	u32 msm_clock = 0;
+	int rc = 0;
+
+	if (!clock)
+		goto out;
+
+	if (clock != msm_host->clk_rate) {
+		msm_clock = sdhci_msm_get_msm_clk_rate(host, clock);
+		rc = clk_set_rate(msm_host->clk, msm_clock);
+		if (rc) {
+			pr_err("%s: failed to set clock at rate %u, requested clock rate %u\n",
+				mmc_hostname(host->mmc), msm_clock, clock);
+			goto out;
+		}
+		msm_host->clk_rate = clock;
+		pr_debug("%s: setting clock at rate %lu\n",
+			mmc_hostname(host->mmc), clk_get_rate(msm_host->clk));
+	}
+out:
+	__sdhci_msm_set_clock(host, clock);
+}
+
 static const struct of_device_id sdhci_msm_dt_match[] = {
 	{ .compatible = "qcom,sdhci-msm-v4" },
 	{},
@@ -592,7 +699,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match);
 static const struct sdhci_ops sdhci_msm_ops = {
 	.platform_execute_tuning = sdhci_msm_execute_tuning,
 	.reset = sdhci_reset,
-	.set_clock = sdhci_set_clock,
+	.set_clock = sdhci_msm_set_clock,
 	.get_min_clock = sdhci_msm_get_min_clock,
 	.get_max_clock = sdhci_msm_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
-- 
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, 
a Linux Foundation Collaborative Project.

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux