If several interfaces are being handled through a single CTL, a main
('master') INTF needs to be programmed into a separate register. Write
corresponding value into that register.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 3 +++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 2 ++
2 files changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 321a89e6400d2824ebda2c08be5e6943cb0f6b11..db36bfa98fc310c1bf35c4817d601ae6cf88d151 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -582,6 +582,9 @@ static void dpu_hw_ctl_intf_cfg_v1(struct dpu_hw_ctl *ctx,
DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
DPU_REG_WRITE(c, CTL_DSC_ACTIVE, dsc_active);
+ if (cfg->intf_master)
+ DPU_REG_WRITE(c, CTL_INTF_MASTER, BIT(cfg->intf_master - INTF_0));
+
if (cfg->merge_3d)
DPU_REG_WRITE(c, CTL_MERGE_3D_ACTIVE, merge_3d_active);
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
index 85c6c835cc8780e6cb66f3a262d9897c91962935..e95989a2fdda6344d0cb9d3036e6ed22a0458675 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h
@@ -36,6 +36,7 @@ struct dpu_hw_stage_cfg {
/**
* struct dpu_hw_intf_cfg :Describes how the DPU writes data to output interface
* @intf : Interface id
+ * @intf_master: Master interface id in the dual pipe topology
* @mode_3d: 3d mux configuration
* @merge_3d: 3d merge block used
* @intf_mode_sel: Interface mode, cmd / vid
@@ -45,6 +46,7 @@ struct dpu_hw_stage_cfg {
*/
struct dpu_hw_intf_cfg {
enum dpu_intf intf;
+ enum dpu_intf intf_master;
enum dpu_wb wb;
enum dpu_3d_blend_mode mode_3d;
enum dpu_merge_3d merge_3d;
--
2.39.5
