Re: [PATCH v2 03/22] usb: ulpi: Support device discovery via device properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 23, 2016 at 4:06 PM, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Tue, Aug 23, 2016 at 3:00 PM, Stephen Boyd <stephen.boyd@xxxxxxxxxx> wrote:
>> On Fri, Aug 5, 2016 at 2:40 PM, Stephen Boyd <stephen.boyd@xxxxxxxxxx> wrote:
>>> Quoting Rob Herring (2016-07-17 19:23:55)
>>>> On Thu, Jul 07, 2016 at 03:20:54PM -0700, Stephen Boyd wrote:
>>>> > +-------
>>>> > +
>>>> > +usb {
>>>> > +     compatible = "vendor,usb-controller";
>>>> > +
>>>> > +     ulpi {
>>>> > +             phy {
>>>> > +                     compatible = "vendor,phy";
>>>> > +                     ulpi-vendor = /bits/ 16 <0x1d6b>;
>>>> > +                     ulpi-product = /bits/ 16 <0x0002>;
>>>> > +             };
>>>> > +     };
>>>>
>>>> I'm still having concerns about describing both phys and devices. If I
>>>> have a controller with 2 ports and 2 devices attached, I'd have
>>>> something like this under the USB controller:
>>>>
>>>> ulpi {
>>>>         phy@1 {
>>>>         };
>>>>         phy@2 {
>>>>         };
>>>> };
>>>
>>> My understanding is there would only be one status="ok" node on the ULPI
>>> bus for the single phy that a usb controller would have. At the least,
>>> the kernel's ULPI layer only seems to support one ULPI phy for a
>>> controller right now. So even if there are two ports, it doesn't mean
>>> there are two phys.
>>>
>>>>
>>>> dev@1 {
>>>> ...
>>>> };
>>>>
>>>> dev@2 {
>>>> ...
>>>> };
>>>>
>>>>
>>>> That doesn't seem the best, but I don't have a better suggestion. Maybe
>>>> the device nodes need to go under the phy nodes?
>>>>
>>>
>>> What if we moved the dev@1 and dev@2 to another sub node like "ports" or
>>> "usb-devices"? Legacy code can support having those devices directly
>>> underneath the usb controller, but future users would always need to put
>>> them in a different sub-node so that we can easily differentiate the
>>> different busses that a usb controller node may support?
>>>
>>> I'm not sure I see any need to relate the phy to the ports that are on
>>> the controller, but if that is needed then perhaps you're right and we
>>> should move the ports underneath the phy. USB core could be modified to
>>> go through the legacy path or through the phy, if it even exists, to
>>> find ports.
>>>
>>> Do we typically do this for other phy designs like sata or pci? The phy
>>> always seemed like a parallel thing to the logical bus that the phy is
>>> used for.
>>
>> Rob does this sound ok to you?
>
> Well, if there's only ever 1 phy under the controller, then as you had
> it is fine.
>

Ok. For ULPI I believe that's the case, but in general usb controllers
can have more than one phy.
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux