Type-C DisplayPort inop due to incorrect settings.
SDM845 (DPU 4.0) lacks wide_bus support; porch shift removed.
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: James A. MacInnes <james.a.macinnes@xxxxxxxxx>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index abd6600046cb..3e0fef0955ce 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -94,17 +94,17 @@ static void drm_mode_to_intf_timing_params(
timing->vsync_polarity = 0;
}
+ timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent);
+ timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent);
+
/* for DP/EDP, Shift timings to align it to bottom right */
- if (phys_enc->hw_intf->cap->type == INTF_DP) {
+ if (phys_enc->hw_intf->cap->type == INTF_DP && timing->wide_bus_en) {
timing->h_back_porch += timing->h_front_porch;
timing->h_front_porch = 0;
timing->v_back_porch += timing->v_front_porch;
timing->v_front_porch = 0;
}
- timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent);
- timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent);
-
/*
* for DP, divide the horizonal parameters by 2 when
* widebus is enabled
--
2.43.0
