[PATCH 0/3] Add PMI8998 VBUS Regulator Support v2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Greetings,

Thank you all for your feedback. I have integrated your recommendations
into this revised patch series (v2); please disregard the previous thread.

Summary of Changes:
- Patch 1/3: Updates the Device Tree Schema bindings to include
  "qcom,pmi8998-vbus-reg" for PMI8998 support.
- Patch 2/3: Extends the Qualcomm USB VBUS regulator driver to support
  PMI8998, dynamically configuring the regulator based on the PMIC type.
- Patch 3/3: Adds the VBUS regulator node to pmi8998.dtsi, enabling
  USB Type-C VBUS support.

Motivation:
To enable VBUS operation on the SDM845 platform PMI8998 PMIC.

Kernel Version & Testing:
- These patches were developed and tested on Linux 6.13.
- Attempting to run Linux 6.14-rc2 on our Lantronix SOM resulted in a
  hard crash, making it unsuitable for validation.
- Validation was performed using a modified device tree, confirming proper
  regulator configuration.
- No regressions were observed on existing PMIC configurations.

Next Steps:
If there are any suggestions or required changes, please let me know.
I will be happy to revise and address any concerns.

Thanks again,
James A. MacInnes
james.a.macinnes@xxxxxxxxx


James A. MacInnes (3):
  regulator: qcom_usb_vbus: Update DTS binding for PMI8998 support
  regulator: qcom_usb_vbus: Add support for PMI8998 VBUS
  arm64: boot: dts: pmi8998.dtsi: Add VBUS regulator node

 .../regulator/qcom,usb-vbus-regulator.yaml    |  1 +
 arch/arm64/boot/dts/qcom/pmi8998.dtsi         |  6 +++
 drivers/regulator/qcom_usb_vbus-regulator.c   | 38 ++++++++++++++++---
 3 files changed, 40 insertions(+), 5 deletions(-)

-- 
2.43.0





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux