Re: [PATCH v4 3/4] arm64: dts: qcom: sm8650: harmonize all unregulated thermal trip points

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3.02.2025 2:23 PM, Neil Armstrong wrote:
> While the CPUs thermal is handled by the LMH, and GPU has a passive
> cooldowm via the HLOS DCVS, all the other thermal blocks only have
> hot and critical and no passive/active trip points.
> 
> Passive or active thermal management for those blocks should
> be either defined if somehow we can express those in DT or
> in the board definition if there's an active cooling device
> available.
> 
> The tsens MAX_THRESHOLD is set to 120C on those platforms, so set
> the hot to 110C to leave a chance to HLOS to react and critical to
> 115C to avoid the monitor thermal shutdown.
> 
> In the case a passive or active cooling device would be
> available, the downstream reference implementation uses
> the 95C "tj" trip point, as we already use for the
> gpuss thermal blocks.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux