SA8775P is a Qualcomm SoC. This series adds driver changes to bring up the TPG interfaces in SA8775P. We have tested this on qcs9100-ride board with 'Test Pattern Generator'. Unlike CSID TPG, this TPG can be seen as a combination of CSIPHY and sensor. Tested with following commands: - media-ctl --reset - v4l2-ctl -d /dev/v4l-subdev0 -c test_pattern=0 - media-ctl -V '"msm_tpg0":0[fmt:SRGGB10/4608x2592 field:none]' - media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]' - media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]' - media-ctl -l '"msm_tpg0":1->"msm_csid0":0[1]' - media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' - v4l2-ctl -d /dev/v4l-subdev0 -c test_pattern=9 - yavta -B capture-mplane -n 5 -f SRGGB10P -s 4608x2592 /dev/video0 --capture=7 Used following tools for the sanity check of these changes. - make -j32 W=1 - ./scripts/checkpatch.pl --- This patch series depends on patch series: https://lore.kernel.org/linux-media/20250210162843.609337-1-quic_vikramsa@xxxxxxxxxxx/ --- --- Wenmeng Liu (3): media: qcom: camss: Add support for TPG common media: qcom: camss: Add link support for TPG common media: qcom: camss: tpg: Add TPG support for SA8775P drivers/media/platform/qcom/camss/Makefile | 2 + drivers/media/platform/qcom/camss/camss-csid-690.c | 15 + drivers/media/platform/qcom/camss/camss-csid.c | 44 +- drivers/media/platform/qcom/camss/camss-tpg-gen1.c | 245 +++++++ drivers/media/platform/qcom/camss/camss-tpg.c | 737 +++++++++++++++++++++ drivers/media/platform/qcom/camss/camss-tpg.h | 130 ++++ drivers/media/platform/qcom/camss/camss.c | 113 ++++ drivers/media/platform/qcom/camss/camss.h | 5 + 8 files changed, 1282 insertions(+), 9 deletions(-) --- base-commit: c1696380f08cf7cc68560a11f2e8c51cb24aa7ba change-id: 20250211-sa8775p_tpg-7de227a82eb4 Best regards, -- Wenmeng Liu <quic_wenmliu@xxxxxxxxxxx>