Hi Adrian, Thanks for the review. On 8/19/2016 6:34 PM, Adrian Hunter wrote:
On 19/08/16 07:36, Ritesh Harjani wrote:SDHC MSM controller need 2x clock for MCLK at GCC. Hence make required changes to have 2x clock for DDR timing modes. Signed-off-by: Ritesh Harjani <riteshh@xxxxxxxxxxxxxx> --- drivers/mmc/host/sdhci-msm.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index c0ad9c2..f0e6293 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -661,21 +661,35 @@ static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); - u32 msm_clock = 0; + struct mmc_ios curr_ios = host->mmc->ios; + u32 msm_clock = clock, ddr_clock = 0;Don't need to initialize msm_clock or ddr_clock
Sure. Will do that.
int rc = 0; if (!clock) goto out; - if (clock != msm_host->clk_rate) { - msm_clock = sdhci_msm_get_msm_clk_rate(host, clock); + msm_clock = sdhci_msm_get_msm_clk_rate(host, clock); + if ((curr_ios.timing == MMC_TIMING_UHS_DDR50) || + (curr_ios.timing == MMC_TIMING_MMC_DDR52) || + (curr_ios.timing == MMC_TIMING_MMC_HS400)) { + /* + * The SDHC requires internal clock frequency to be double the + * actual clock that will be set for DDR mode. The controller + * uses the faster clock(100/400MHz) for some of its parts and + * send the actual required clock (50/200MHz) to the card. + */ + ddr_clock = clock * 2; + msm_clock = sdhci_msm_get_msm_clk_rate(host, ddr_clock); + } + + if (msm_clock != msm_host->clk_rate) { rc = clk_set_rate(msm_host->clk, msm_clock); if (rc) { pr_err("%s: failed to set clock at rate %u, requested clock rate %u\n", mmc_hostname(host->mmc), msm_clock, clock); goto out; } - msm_host->clk_rate = clock; + msm_host->clk_rate = msm_clock; pr_debug("%s: setting clock at rate %lu\n", mmc_hostname(host->mmc), clk_get_rate(msm_host->clk)); }
-- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
