Re: [PATCH v4 3/8] scsi: ufs: core: Add a vop to map clock frequency to gear speed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2025-02-10 at 18:02 +0800, Ziqi Chen wrote:
> 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> From: Can Guo <quic_cang@xxxxxxxxxxx>
> 
> Add a vop to map UFS host controller clock frequencies to the
> corresponding
> maximum supported UFS high speed gear speeds. During clock scaling,
> we can
> map the target clock frequency, demanded by devfreq, to the maximum
> supported gear speed, so that devfreq can scale the gear to the
> highest
> gear speed supported at the target clock frequency, instead of just
> scaling
> up/down the gear between the min and max gear speeds.
> 
> Co-developed-by: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
> Signed-off-by: Ziqi Chen <quic_ziqichen@xxxxxxxxxxx>
> Signed-off-by: Can Guo <quic_cang@xxxxxxxxxxx>
> Reviewed-by: Bean Huo <beanhuo@xxxxxxxxxx>
> Reviewed-by: Bart Van Assche <bvanassche@xxxxxxx>
> Tested-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> ---
> v2 ->v3:
> 1. Remove the parameter 'gear' and use it as function return result.
> 2. Change "vops" into "vop" in commit message.
> ---
>  drivers/ufs/core/ufshcd-priv.h | 8 ++++++++
>  include/ufs/ufshcd.h           | 2 ++
>  2 files changed, 10 insertions(+)
> 
> diff --git a/drivers/ufs/core/ufshcd-priv.h
> b/drivers/ufs/core/ufshcd-priv.h
> index 0549b65f71ed..4da3e65c6735 100644
> --- a/drivers/ufs/core/ufshcd-priv.h
> +++ b/drivers/ufs/core/ufshcd-priv.h
> @@ -277,6 +277,14 @@ static inline int
> ufshcd_mcq_vops_config_esi(struct ufs_hba *hba)
>         return -EOPNOTSUPP;
>  }
> 
> +static inline int ufshcd_vops_freq_to_gear_speed(struct ufs_hba 

Hi Ziqi,

Gear speed type in struct ufs_pa_layer_attr is u32.
I think it would be better to unify the type here.



> *hba, unsigned long freq)
> +{
> +       if (hba->vops && hba->vops->freq_to_gear_speed)
> +               return hba->vops->freq_to_gear_speed(hba, freq);
> +
> +       return -EOPNOTSUPP;
> +}
> +
>  extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[];
> 
>  /**
> diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h
> index f51d425696e7..cdb853f5b871 100644
> --- a/include/ufs/ufshcd.h
> +++ b/include/ufs/ufshcd.h
> @@ -336,6 +336,7 @@ struct ufs_pwr_mode_info {
>   * @get_outstanding_cqs: called to get outstanding completion queues
>   * @config_esi: called to config Event Specific Interrupt
>   * @config_scsi_dev: called to configure SCSI device parameters
> + * @freq_to_gear_speed: called to map clock frequency to the max
> supported gear speed
>   */
>  struct ufs_hba_variant_ops {
>         const char *name;
> @@ -387,6 +388,7 @@ struct ufs_hba_variant_ops {
>                                        unsigned long *ocqs);
>         int     (*config_esi)(struct ufs_hba *hba);
>         void    (*config_scsi_dev)(struct scsi_device *sdev);
> +       int (*freq_to_gear_speed)(struct ufs_hba *hba, unsigned long
> freq);
> 

Please keep the indentation consistent too.

Thanks
Peter

>  };
> 
>  /* clock gating state  */
> --
> 2.34.1
> 





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [Linux for Sparc]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux