On 2025-02-10 01:11:59, Dmitry Baryshkov wrote:
> On Sun, Feb 09, 2025 at 10:42:53PM +0100, Marijn Suijten wrote:
> > Ordering issues here cause an uninitialized (default STANDALONE)
> > usecase to be programmed (which appears to be a MUX) in some cases
> > when msm_dsi_host_register() is called, leading to the slave PLL in
> > bonded-DSI mode to source from a clock parent (dsi1vco) that is off.
> >
> > This should seemingly not be a problem as the actual dispcc clocks from
> > DSI1 that are muxed in the clock tree of DSI0 are way further down, this
> > bit still seems to have an effect on them somehow and causes the right
> > side of the panel controlled by DSI1 to not function.
> >
> > In an ideal world this code is refactored to no longer have such
> > error-prone calls "across subsystems", and instead model the "PLL src"
> > register field as a regular mux so that changing the clock parents
> > programmatically or in DTS via `assigned-clock-parents` has the
> > desired effect.
> > But for the avid reader, the clocks that we *are* muxing into DSI0's
> > tree are way further down, so if this bit turns out to be a simple mux
> > between dsiXvco and out_div, that shouldn't have any effect as this
> > whole tree is off anyway.
> >
> > Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> > ---
> > drivers/gpu/drm/msm/dsi/dsi_manager.c | 30 +++++++++++++++++++-----------
> > 1 file changed, 19 insertions(+), 11 deletions(-)
>
>
> Fixes: 57bf43389337 ("drm/msm/dsi: Pass down use case to PHY")
I'm not exactly confident about that. Abhinav pointed out in
https://gitlab.freedesktop.org/drm/msm/-/issues/41#note_2375646 that
msm_dsi_host_register() was not supposed to be enabling the PHY, which I
provided a counter-stacktrace for to show that is indeed the case.
Either this was always a problem that's only become visible now (and it's an
issue with that patch), or a different change causes msm_dsi_host_register()
to enable the PHY and program the usecase too early?
What do you think?
- Marijn
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
>
> >
> > diff --git a/drivers/gpu/drm/msm/dsi/dsi_manager.c b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> > index a210b7c9e5ca281a46fbdb226e25832719a684ea..b93205c034e4acc73d536deeddce6ebd694b4a80 100644
> > --- a/drivers/gpu/drm/msm/dsi/dsi_manager.c
> > +++ b/drivers/gpu/drm/msm/dsi/dsi_manager.c
> > @@ -74,17 +74,33 @@ static int dsi_mgr_setup_components(int id)
> > int ret;
> >
> > if (!IS_BONDED_DSI()) {
> > + /* Set the usecase before calling msm_dsi_host_register(), which would
> > + * already program the PLL source mux based on a default usecase.
> > + */
> > + msm_dsi_phy_set_usecase(msm_dsi->phy, MSM_DSI_PHY_STANDALONE);
> > + msm_dsi_host_set_phy_mode(msm_dsi->host, msm_dsi->phy);
> > +
> > ret = msm_dsi_host_register(msm_dsi->host);
> > if (ret)
> > return ret;
> > -
> > - msm_dsi_phy_set_usecase(msm_dsi->phy, MSM_DSI_PHY_STANDALONE);
> > - msm_dsi_host_set_phy_mode(msm_dsi->host, msm_dsi->phy);
> > } else if (other_dsi) {
> > struct msm_dsi *master_link_dsi = IS_MASTER_DSI_LINK(id) ?
> > msm_dsi : other_dsi;
> > struct msm_dsi *slave_link_dsi = IS_MASTER_DSI_LINK(id) ?
> > other_dsi : msm_dsi;
> > +
> > + /* PLL0 is to drive both DSI link clocks in bonded DSI mode.
> > + *
> > + /* Set the usecase before calling msm_dsi_host_register(), which would
> > + * already program the PLL source mux based on a default usecase.
> > + */
> > + msm_dsi_phy_set_usecase(clk_master_dsi->phy,
> > + MSM_DSI_PHY_MASTER);
> > + msm_dsi_phy_set_usecase(clk_slave_dsi->phy,
> > + MSM_DSI_PHY_SLAVE);
> > + msm_dsi_host_set_phy_mode(msm_dsi->host, msm_dsi->phy);
> > + msm_dsi_host_set_phy_mode(other_dsi->host, other_dsi->phy);
> > +
> > /* Register slave host first, so that slave DSI device
> > * has a chance to probe, and do not block the master
> > * DSI device's probe.
> > @@ -98,14 +114,6 @@ static int dsi_mgr_setup_components(int id)
> > ret = msm_dsi_host_register(master_link_dsi->host);
> > if (ret)
> > return ret;
> > -
> > - /* PLL0 is to drive both 2 DSI link clocks in bonded DSI mode. */
> > - msm_dsi_phy_set_usecase(clk_master_dsi->phy,
> > - MSM_DSI_PHY_MASTER);
> > - msm_dsi_phy_set_usecase(clk_slave_dsi->phy,
> > - MSM_DSI_PHY_SLAVE);
> > - msm_dsi_host_set_phy_mode(msm_dsi->host, msm_dsi->phy);
> > - msm_dsi_host_set_phy_mode(other_dsi->host, other_dsi->phy);
> > }
> >
> > return 0;
> >
> > --
> > 2.48.1
> >
>
> --
> With best wishes
> Dmitry
